User Manual

33
Advanced (WDS Bridge mode)
Fragment Threshold Specifies the size of the packet per fragment. This function can reduce the chance of packet
collision.
However when this value is set too low, there will be increased overheads resulting in poor
performance.
RTS Threshold When the packet size is smaller than the RTS Threshold, then the packet will be sent without
RTS/CTS handshake which may result in incorrect transmission.
N Data Rate You can limit the transfer rates between the device and wireless clients. Each Modulation Coding
Scheme (MCS) refers to a specific transfer speed.
Channel Bandwidth Set whether each channel uses 20 or 40Mhz.
To achieve 11n speeds, 40Mhz channels must be used.