User Manual
Table Of Contents
32
performance.
RTS Threshold
When the packet size is smaller than the RTS Threshold, then the packet will be sent without
RTS/CTS handshake which may result in incorrect transmission.
Beacon Interval The time interval that the device broadcasts a beacon. This beacon is used to synchronize all
wireless clients on the network.
DTIM Period
A Delivery Traffic Indication Message informs all wireless clients that the access point will be
sending Multi-casted data.
N Data Rate You can limit the transfer rates between the device and wireless clients. Each Modulation Coding
Scheme (MCS) refers to a specific transfer speed.
Channel Bandwidth
Set whether each channel uses 20 or 40Mhz.
To achieve 11n speeds, 40Mhz channels must be used.
Preamble Type A preamble is a message that helps access points synchronize with the client.
Long Preamble is standard based so increases compatibility.
Short Preamble is non-standard, so it decreases compatibility but increases performance.
Tx Power
Set the power output of the wireless signal.