User Manual

30
Enable SSID# Select the number of SSID’s (Wireless Network names) you would like.
You can create up to 4 separate wireless networks.
SSID# Enter the name of your wireless network. You can use up to 32 characters.
Auto Channel
When enabled, the device will scan the wireless signals around your area and select the channel
with the least interference.
Channel Manually select which channel the wireless signal will use.
Check Channel Time When Auto Channel is Enabled, you can specify the period of the device will scan the wireless
signals around your area.
Wireless Distribution System (WDS)
Using WDS to connect Access Point wirelessly, and in doing so extend a
wired infrastructure to locations where cabling is not possible or
inefficient to implement.
Note that compatibility between different brands and models is not
guaranteed. It is recommended that the WDS network be created using
the same models for maximum compatibility.
Also note that all Access Points in the WDS network needs to use the
same Channel and Security settings.
To create a WDS network, please enter the MAC addresses of the Access
Points that you want included in the WDS. There can be a maximum of
four access points.