User Manual

Multi-Function Gigabit Wireless-N Client Bridge

Version 1.0

3.4 Management

 Click on the Management link on the navigation drop-

down menu. You will then see four options: Admin,

SNMP, Firmware, and Configure. Each option is

described in detail below.

3.4.1 Admin

 Click on the Admin link on the Management navigation drop-down menu. This page allows

you to configure a new password to login to the device. It is recommended to change the

default password for security reasons.

 Old Password: Specify the old password of the device.

 New Password: Specify a new password.

 Repeat New Password: Re-type the new password.

 Click on the Apply button to save the changes.

3.4.2 SNMP

 Click on the SNMP link on the Management navigation drop-down menu. This option

allows you to assign the contact details, location, community name and trap settings for

SNMP. This is a networking management protocol used to monitor network-attached devices.

SNMP allows messages (called protocol data units) to be sent to various parts of a network.