User Manual

Multi-Function Gigabit Wireless-N Client Bridge
Version 1.0
27
 Check on the Enable Wireless MAC Filtering
 Type in Description as a note for your own reference
 Enter the MAC address that you allow for accessing to your device
 Press Add to apply the policy
 Click Apply for the setting to take effect
3.2.4.2.6 WPS (Wi-Fi Protected Setup)
 Click on the WPS link under the Wireless drop-down menu
 WPS requires you to enter a PIN for the device press the configuration button on the device.
If the device supports Wi-Fi Protected Setup and has a configuration button, you can add it to
the network by pressing the configuration button on the device
 There are several ways to add a wireless device to your network. Access to the wireless
network is controlled by a registrar. A registrar only allows devices onto the wireless network
if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the device.
The device acts as a registrar for the network, although other devices may act as a registrar as
well.
 Wi-Fi Protected Setup is a feature that locks the wireless security settings and prevents the
settings from being changed by any new external registrar using its PIN. Devices can still be
added to the wireless network using Wi-Fi Protected Setup.