User's Manual

To attach the unit to a ceiling using the provided T-rail connectors:

1. Attach the T-rail connectors to the bottom cover of the FortiAP unit using the provided

short screws.

Two sizes of T-rail connectors are included in the mounting hardware kit: 15/16in

(2.38cm) and 9/16in (1.43cm).

If extra space is required to accommodate drop ceiling tiles, use the provided

spacers and long screws.

2. Line up the connected T-rail connectors with an appropriately sized rail and press the

unit onto the rail until it snaps into place.

Note: To protect your FortiAP unit, use the Kensington security slot to attach a cable lock

(cable lock is not included).

P2.6x25 Screw

P2.6x10 Screw

Spacer

Clip

T-rail

Kensington

Security Slot