User Manual

broadcast and multicast messages. The default value is 1. Valid settings are between 1
and 10.
¾ Data rate: You may select a data rate from the drop-down list, however, it is recommended
to select auto. This is also known as auto-fallback.
¾ N Data Rate: You may select N data rate from the drop-down list, however, it is
recommended to select auto.
¾ Channel Bandwidth: Select channel bandwidth.
¾ Preamble Type: Select a short or long preamble. For optimum performance it is
recommended to also configure the client device as the same preamble type.
¾ CTS Protection: CTS (Clear to Send) can be always enabled, auto, or disabled. By enabled
CTS, the Access Point and clients will wait for a ‘clear’ signal before transmitting. It is
recommended to select auto.
4.2.1.4. Security
¾ Encryption: Disabled