User Manual

EAP-3660 11b/g Wireless Access Point Version 1.1

1 Introduction

This is a smoke detector looking Wireless Access Point / Repeater / WDS that

operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b

(2.4GHz, 11Mbps) and faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's the

best way to add wireless capability to your existing wired network, or to add

bandwidth to your wireless installation.

This device features high transmitted output power and high receivable sensitivity

along with antenna diversity. High output power and high sensitivity can extend

range and coverage to reduce the roaming between Access Points to get more

stable wireless connection. It also reduces the expense of equipment in the same

environment.

To protect your wireless connectivity, it can encrypt all wireless transmissions

through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC

address filter lets you select exactly which stations should have access to your

network. In addition, the User Isolation function can protect the private network

between client users.

The attractive design, high performance, and array of features makes this a suitable

wireless solution for your residence or office.

This chapter describes the features & benefits, package contents, applications, and

network configuration.

Features & Benefits

Features Benefits

High Speed Data Rate Up to 54Mbps Capable of handling heavy data payloads such

as MPEG video streaming

High Output Power up to 25 dBm

Extended excellent Range and Coverage (fewer

APs)

IEEE 802.11b/g Compliant Fully Interoperable with IEEE

802.11b/IEEE802.11g compliant devices

Embedded Antenna

Users won’t see antenna in your building

environment

Point-to-point, Point-to-multipoint

Wireless Connectivity

Let users transfer data between two buildings

or multiple buildings

WDS (Wireless Distributed System) Make wireless AP and Bridge mode

simultaneously as a wireless repeater

Universal Repeater The easiest way to expand your wireless

network's coverage

Support Multi-SSID function (4 SSID)

in AP mode

Allow clients to access different networks

through a single access point and assign

different policies and functions for each SSID