User Manual

EAP-3660 11b/g Wireless Access Point Version 1.1
16
System Properties
 The System Properties allows you to configure a name for the device (this is not
the SSID), select and country and the operational mode.
 Device Name: Specify a name for the device – this is not the SSID.
 Country/Region: Select the region from the drop-down list.
 Operation Mode: Select Access Point or Repeater radio button. In order to
configure the Repeater, click on the WDS Link Settings under the Wireless drop-
down menu.
 Click on the Apply button to save the changes.
IP Settings
 The IP Settings page allows you to configure the device with a static IP address
or a DHCP client.
 IP Network Setting: Select Obtain an IP address automatically (DHCP) radio
button if the Access Point is connected to a DHCP server. This will allow the Access
Point to pass IP addresses to the clients associated with it. You may select Specify
an IP Address radio button if you would like the device to use a static IP address. In
this case, you would be required to specify an IP address, subnet mask, and default
gateway IP address.
 IP Address: Specify an IP address
 IP Subnet Mask: Specify the subnet mask for the IP address
 Default Gateway: Specify the IP address of the default gateway.
 Click on the Apply button to save the changes.