User Manual

ManualsBrandsSenal ManualsLarge Diaphragm CondenserLarge-Diaphragm Multi-Pattern Condenser Microphone

Mounting the Microphone

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪

Mounting the Microphone

To mount the SCM-660, follow these steps:

1� Screw the included shock mount onto a 5/8˝ threaded

microphone stand and make sure it is in a 90-degree position�

Then fully tighten the locking knob on the shock mount�

2� Carefully thread the bottom of the microphone to the shock

mount using the shock-mount thread and fully tighten�

Note: The front of the microphone (showing the Senal logo)

should be facing your sound source for recording�