User Manual

8
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Instructions
Powering the MXGN Microphone
The MXGN microphones operate on phantom power. Once connected to the power
source, the MXGN mic is ready to work.
Important! When integrating the MXGN microphone into a video or audio conferencing
system, or using it with a mixing board, make sure that phantom power is enabled.
Low-Cut Filter
Activate the low-cut filter when using the microphone in rooms with inadequate acoustic
treatment or constant noise from air conditioning, fans, or lights.
To filter out low frequencies, move the selector switch to the Low Cut position. Moving
the selector to the Flat position turns off the low-cut filter.
Talk/Mute
Move the switch to select the talk/mute function of the touch pad.
When the LED ring light is on, the microphone is on.
When is the LED ring light is off, the microphone is muted.
The touch pad on the microphone’s base controls the programmable mute function.
There are three programming options.