User Manual

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Basic Operation
4. Use the Up/Down buttons to select the group number,
and press the Set button to store it. The channel number
will flash.
5. Scroll to the desired channel number, and press Set to
store it. The receiver will automatically prompt you to
sync the system.
6. With [
SYNC ] on the screen, press the Set button. The
Yes/No prompt will flash on the screen.
7. Press the Up/Down buttons until [
YES ] flashes on the
screen, and press the Set button. The sync indicator arrow
will show on the screen.
8. Make sure the Transmitter and the Receiver IR ports are
facing each other until [
SYNC  ] appears on the screen of
the device that’s initiating the sync.
9. When syncing is complete, confirm that the receiver and
transmitter are tuned to the same channel.
By Frequency
1. Press and hold the Set button to enter menu mode.
2. Use the Up/Down buttons to scroll to [
TUNE ], and press
the Set button.
3. Use the Up/Down buttons to scroll to the [
FREQUENCY ]
prompt, and press the Set button.
4. Use the Up/Down buttons to manually tune the frequency
in 0.025 MHz increments.
Press and hold to scroll rapidly through the
available frequencies.
5. Once you have selected the desired frequency, press Set
to store it. The receiver will automatically prompt you to
sync the system.
16