User Manual

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Common Advanced Functions
30
Common Advanced Functions
(AWS-2000R Receiver, AWS-2000T Transmitter,
and AWS-2000R Plug-On Transmitter)
Name
Naming the units makes them easy to identify. This is
useful when working with several pairs of transmitters and
receivers on a production or shoot. To change the name of
the unit, follow these steps:
Note: Changing the name can be done on either the
transmitter or receiver.
1. Press and hold the Set button to enter menu mode.
2. Scroll to [
ADVANCED MENU ], and press the Set button.
3. In the advanced menu, scroll to [
NAME ].
4. Press the Set button to enter the name menu. The first
character of the name will blink.
5. Select a character by using the Up/Down buttons.
6. Press the Set button to move to the next character. Press
the Power button to return to the previous character.
7. Repeat steps 3 and 4 until you have completed the name.
8. Continue to press the Set button until the cursor reaches
the end of the line.
9. Pressing the Set button automatically opens the [
SYNC ]
menu. Press the Set button.
10. [
YES ] will blink on the screen. Press the Set button to
sync the name with the other unit.
Note: Make sure the transmitter and receiver are powered
on, and the IR ports face each other.
[
SYNC  ] will appear to indicate that the name has been
changed, and the name will appear on both the transmitter’s
and receiver’s main screens.