User Manual

Advanced Functions
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Main Output
The receiver is capable of sending a balanced mic- or line-
level output signal to devices with XLR inputs or 3.5 mm
mini-plug inputs.
To set the output signal:
1. Press and hold the Set button to enter menu mode.
2. In menu mode, scroll to [
MAIN OUT ], and press the Set
button. The menu selection will blink.
3. Use the Up/Down buttons to set the output level for your
input device [
-29 db ] to [ 8 dB ].
4. Press the Set button to confirm the setting.
Headphone Output Volume
The headphone output signal can be preset to a preferred
volume. Before you begin, make sure to determine a
listening level that is comfortable for you.
1. Press and hold the Set button to enter menu mode.
2. In menu mode, scroll to [
PHONEOUT ], and press the Set
button. The menu selection will blink.
3. Preset the headphone level to any value between
[ -29 db ] and [ 8 dB ].
4. Press the Set button to save the change.
Note: The headphone level can still be adjusted with the
Up/Down buttons (see Setting Output Levels on page 20).
27