User Manual

Setting Output Levels
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Input Level
The Up/Down buttons control the input level from
[ -15 db ] to [ 0 dB ] on the transmitter or [ -30 db ] to [ 0 dB ]
on the plug-on transmitter.
Lock
To lock the transmitter to prevent accidental changes to the
output level, follow these steps:
1. Press and hold the Set button to enter menu mode.
2. Scroll to [
LOCK ], and press the Set button. The menu
selection will blink.
3. Use the Up/Down buttons to select [
LOCKED ], and press
the Set button to save your selection.
Mute (AWS-2000T Transmitter)
The mute button can be set for three different modes:
• Latch: Pressing the mute button mutes the transmitter.
Pressing the mute button again resumes transmission.
• Momentary: The transmitter will be muted as long as the
mute button is pressed down. Releasing the mute button
resumes transmission.
• O: This turns off the mute button and should be
selected if there is a concern that the mute button could
be accidentally pressed.
To set the mute button function, follow these steps:
1. Press and hold the Set button to enter menu mode.
2. Scroll to [
ADVANCED MENU ], and press the Set button.
3. In the advanced menu, scroll to [
MUTE ], and press the Set
button. The menu selection will blink.
23