User Manual

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Setting Output Levels
3. In the advanced menu, scroll to [ OUTPUT ], and press the
Set button. The menu selection will blink.
4. Use the Up/Down buttons to scroll to [
TOG LOCK ], and
press the Set button.
5. When you have returned to the main screen, double-press
the power button to open the output menu. Use the Up/
Down buttons to select [
MAIN ] or [ PHONE ], and press the
Set button. The Up/Down buttons are now permanently
set to control the output of the desired selection. To
change the function of the Up/Down buttons, repeat
these steps, and change the selection.
Transmitter & Plug-On Transmitter
Power Output Level
The AWS-2000T and AWS-2000P Transmitters feature two
output level settings:
• Lo (5 mW) is ideal when the transmitter is relatively
close (150 feet or less) to the receiver. It also provides
the transmitter with approximately 20% more
battery runtime.
• Hi (30 MW) allows the microphone to cover a wider area
and more range. This setting is recommended if your
subject is moving around or is consistently more than
200 feet from the receiver.
To change the transmitter’s power output setting, follow
these steps:
1. Press and hold the Set button to enter menu mode.
2. Scroll to [
POWEROUT ], and press the Set button. The menu
selection will blink.
3. Use the Up/Down buttons to select the power output,
and press the Set button to save your selection.
22