User Manual

Setting Output Levels

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪

2. Use the Up/Down buttons to adjust the headphone

output. The screen will read [

PHONE OUT ] along with the

output level [

-29 db ] to [ 8 dB ].

3. Press the Set button to save the change.

After approximately 7 seconds, the Up/Down buttons will

return to control the main output.

Note: Double-pressing the power button will toggle to

control the main output level if the Up/Down buttons are

preset to control the headphone output (see Headphone

Output below).

Headphone Output

To preset the Up/Down buttons to control the headphone

output, follow these steps:

1. Press and hold the Set button to enter menu mode.

2. Scroll to [

ADVANCED MENU ], and press the Set button.

3. In the advanced menu, scroll to [

OUTPUT ], and press the

Set button. The menu selection will blink.

4. Use the Up/Down buttons to scroll to [

PHONE ], and press

the Set button to save the selection.

The Up/Down buttons will now control over the

headphone volume.

Double-press the power button for temporary control of the

main output with the Up/Down buttons (see Toggling the

Output Control on page 20).

Toggle Lock

When Toggle Lock is activated, double-pressing the power

button allows you to permanently change the output level

functions of the Up/Down buttons.

To activate Toggle Lock, follow these steps:

1. Press and hold the Set button to enter menu mode.

2. Scroll to [

ADVANCED MENU ], and press the Set button.