User Manual

Setting Input Levels
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Setting Input Levels
AWS-2000T Transmitter and AWS-2000P
Plug-On Transmitter
The transmitter and plug-on transmitter can be set to MIC or
LINE input.
• Select [
LINE ] when sending a line-level signal from
devices such as a mixer or playback device. Selecting
[ LINE ] sets the input level to a fixed line level.
• Select [
MIC ] when connecting a microphone to the
transmitter. Selecting [
MIC ] allows you to adjust the
input level from -15 to 0 dB on the transmitter, or
-30 to 0 dB on the plug-on transmitter.
To set the input level, follow these steps:
1. Press and hold the Set button to activate menu mode.
2. Use the Up/Down buttons to scroll to the [
INPUT ] menu,
and press the Set button to enter the input preferences.
The current input selection will blink.
3. Use the Up/Down buttons to select [
MIC ] or [ LINE ].
• If you choose [
LINE ], press the Set button to store
the selection.
• If you choose [
MIC ], press the Set button. The input
dB level, e.g., [
-6dB ] will appear on the screen. Use
the Up/Down buttons to raise or lower the input level.
Press the Set button to store the change.
19