User Manual

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Getting Started
Getting Started
Installing the Batteries
1. Open the battery compartment by
sliding the battery compartment
door in the directions indicated by
the arrow.
2. Install the batteries into the
battery compartment. Make sure
to match the polarity indicated
on the inside of the battery
compartment door.
3. Press the battery compartment
door down, and slide it back into
place until it locks shut.
Selecting the Battery Type
The first time the batteries are installed, the battery
selection window will appear.
Select the setting that matches the type of battery you’re
using (Alkaline, Lithium, or rechargeable NiMH) by following
these steps:
1. Use the Up/Down buttons to scroll to the appropriate
battery type. [
BATTERY ALKALINE ]
2. Press the Set button.
Note: If you select the wrong battery type, the unit will still
function, but the battery meter will be inaccurate.
To change the battery type from the main menu during use,
see the Battery section under Common Advanced Functions
on page 31.
Powering On the Units
Press and hold the power button. The OLED screen and LED
indicators will illuminate.
10