User Manual

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪

Setting Output Levels

4. Use the Up/Down buttons to select between [ LATCH ],

[ OFF ], or [ MOMENTARY ], and press the Set button to save

your selection.

5. When muted, [

MUTE ] will appear in place of the audio

input level meter.

Mute (AWS-2000P Plug-On Transmitter)

Double-press the power button to

automatically mute the transmitter

in latch mode.

Double-press again to resume

transmission.

Phantom Power (Plug-On Transmitter Only)

Phantom power is necessary if you are using a condenser

microphone. To activate phantom power, follow these steps:

1. Press and hold the Set button to enter menu mode.

2. Scroll to [

PHANTOM ], and press the Set button. The menu

selection will blink.

3. Use the Up/Down buttons to scroll to [

ON ], and press the

Set button to save your selection.

To deactivate phantom power, return to the [ PHANTOM ] menu,

select [

OFF ], and press the Set button.

GR.06-CH.08

AWS-2000

MIC

LC PLT