Instruction Manual

2.5 Auto prompt message (error message)
Error message definition:
E-01 Motor malfunction
E-02 Throttle malfunction
E-03 Controller malfunction
E-05 Controller under voltage
E-06 Communication failure, display cannot receive the signal from controller
*If there is any errors, feel free to reaching out to our
support team at
[e-mail], we are here to
help! Please also send us some photos/videos of the issue.
3. Parameter Settings
After turn on the display, long press and to enter the parameter
setting page:
P01: Background light, 1 to 3, dark to bright
P02: Mileage unit, 0 is km, 1 is mile
P03: Voltage level, 24V, 36V, 48V
P04: Auto sleep time, 0 is no sleep, other numbers means sleep 1-60 minutes
P05: Assist gear, 3 gears, 5 gears, 9 gears
P06: Wheel diameter (inch), precision 0.1
P07: Number of speed magnets, 1 to 99
P08: Speed limit, 0-99 range, 99 means no speed limit (full speed)
P09: Zero/ non-zero start, 0 is zero start, 1 is non-zero start
P10: Drive mode setting, 0 is pedal assist start, 1 is power drive start, 2 is assist and
power start together
P11: Resistance sensitivity setting, range 1 to 24
P12: Resistance start intensity setting, range 0 to 5
P13: Assist magnet type setting, 3 numbers, 5, 8 and 12