Instruction Manual

B. Function Operation
1. Turn On and Off
Long press button to turn on the display; long press button again to
turn it off. The display will turn off automatically when the e-bike stops and no
further options for 5 minutes (auto turn off time can be adjusted).
2. Main Interface
The main interface of the
display looks like this:
2.1 Turn on the headlight
At the main interface, long press button to
turn on the headlight; long press button
again to turn it off:
2.2 PAS level switch
Short press button or button to switch between level 0-5. Level
0 is with no power assist, from level 1 to 5 the motor power increases
sequentially.
2.3 Cruise function
When the real-time riding speed is over 4.35 mph (7km/h), keep the speed still
for at least 10 seconds, the system will enter the cruise mode, word “CRUISE”
will display on the screen. Stop the cruise by hit the brake or press the thumb
throttle again (cruise function can be disabled).
2.4 Clear single time riding data
When the single time mileage shows on the display, long press and
buttons can clear the riding time and mileage.