User`s guide

English
SMH10R
7
7. Attach the velcro pads to the battery pack in the same manner
as the main unit and place the battery on the back side of your
helmet. Attach the battery connector to the 2 pin connector of
the main unit cable.
4.1 Powering On
Press the Center Button and the (+) Button at the same time for
1 second to power on. The blue LED turns on and you will hear
ascending beeps and “Hello”.
4.2 Powering Off
Tap the Center Button and the (+) Button simultaneously (you
don’t need to press and hold in order for the system to power
off). The red LED turns on for about 2 seconds until it turns off
completely and you will hear “Goodbye” and descending beeps.
4.3 Charging
The charging LED beside the charging port turns on red while
charging, and turns to blue when the headset is fully charged.
It takes about 2.5 hours to be completely charged. You can use
the SMH10R while charging. It is especially helpful when you
use a cigarette charger for a long road trip.
4.4 Low Battery Warning
When the battery is low, the blinking blue LED in stand-by mode
turns to red and you will hear mid-tone triple beeps and a voice
4. POWERING ON/OFF AND CHARGING