User`s guide

SMH10R
6
4. Attach the main unit to the velcro pad of your helmet.
5. Place the speakers to the helmet along with the velcro pads,
centered to your ear, in the ear pockets of the helmet. If the
helmet has deep ear pockets, you can use the speaker pads
to place the speakers closer to your ears. Attach the speaker
connector to the 4 pin connector of the main unit cable.
6. There are two types of microphones that can be installed in your
helmet. In the case of the attachable boom microphone, place
the velcro end of the boom microphone between the internal
helmet cheek pad and the internal wall of the helmet shell and
attach the microphone connector to the 2 pin connector of the
main unit cable. The boom microphone should be mounted so it
is facing close to your mouth when you wear the helmet.
In the case of the wired microphone, attach the enclosed velcro
pad for the wired microphone to the inside of the chin guard for
full-face helmets. Place the wired microphone on the velcro pad
and attach the microphone connector to the 2 pin connector of the
main unit cable.