User`s guide

English
SMH10R
9
6. SMH10R CONFIGURATION SETTING
You can set the configuration of the SMH10R by the voice menu
instruction as below.
1. To enter into voice configuration menu, press and hold the
Center Button for 10 seconds until the LED shows solid blue
and you hear high tone double beeps. You will also hear a voice
prompt, “Conguration menu”.
2. Tap the (+) Button or (-) Button to navigate between the menus.
You will hear voice prompts for each menu items as below.
3. You can enable / disable the feature or execute the command
by tapping the Center Button.
4. If you want to exit the configuration immediately, tap the
(+) Button or (-) Button until you hear a voice prompt, “Exit
conguration”, then tap the Center Button.
The voice prompt for each menu item is as follows:
(1) Phone pairing (7) VOX sensitivity
(2) Multipoint pairing (8) Voice prompt
(3) Phone selective pairing (9) Delete all pairings
(4) Media selective pairing (10) Factory reset
(5) VOX phone (11) Exit conguration
(6) VOX intercom
Phone pairing
VOX sensitivity
Multipoint pairing Voice prompt
Phone selective pairing Delete all pairings
Media Selective pairing Factory reset
VOX phone Exit configuration
VOX intercom