User's Guide www.senabluetooth.
Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SM10™, SR10i are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license.
CONTENTS 1. INTRODUCTION 6 2. PACKAGE CONTENTS 9 3. INSTALLING THE SR10i 11 3.1 Placing on the Belt/Pocket 11 4. POWERING ON/OFF AND CHARGING 12 4.1 Powering On 12 4.2 Powering Off 12 4.3 Charging 12 4.4 Low Battery Warning 13 5. PAIRING THE SR10i WITH BLUETOOTH DEVICES 14 5.1 Bluetooth Headset Pairing 14 5.2 Bluetooth Mobile Phone Pairing 14 6. USING THE SR10i 15 6.1 Using Two-way Radios 15 6.2 Ports and Cables 16 6.3 Using Mobile Phone 17 6.
English 7.
1. INTRODUCTION Thank you for choosing the Sena SR10i. The SR10i is a Bluetooth two-way radio adapter and mobile phone handsfree gateway based on Bluetooth 2.1+EDR technology. Users can connect various two-way radios in the market with the SR10i and connect wirelessly to a variety of Bluetooth communication headsets. At the same time, as a Bluetooth mobile phone handsfree gateway, the SR10i lets users connect Bluetooth headsets to mobile phones as well.
English Please read this user’s guide carefully before using the SR10i. Also refer to www.senabluetooth.com for the latest version of the user’s guide and additional information related to Sena Bluetooth products.
Technical Specifications: • Bluetooth 2.1+EDR • Supporting profiles: Headset Profile, Hands-Free Profile (HFP) • Operating time: 12 hours • Standby time: 10 days • Battery charging time: 3.5 hours • Lithium polymer battery • Dimensions: 108 mm × 52 mm × 29 mm (4.3 in × 2.0 in × 1.1 in) • Weight: 81g (2.
English 2. PACKAGE CONTENTS • Main Unit Pairing Button • Bluetooth Headset Pairing Mode • Mobile Phone Pairing Mode PTT Button • Transmit Radio • Open Audio Channel DC Power Charging & Firmware Upgrade Port AUX2 Port • Mobile Phone, GPS Navigation Main Port • 6-pin Hirose Connector for Two-way Radio Devices AUX1 Port • GPS Navigation 2.
• USB Power & Data Cable • 3.5mm Audio Jack Cable • Belt Clip Kit -------------------------------- * Wired PTT button is not included in the package. Must be purchased separately.
English 3. INSTALLING THE SR10i 3.1 Placing on the Belt/Pocket 1. Place the belt-clip on the back of the main unit, and tighten the screw. 2. Place the main unit on the belt with belt-clip.
4. POWERING ON/OFF AND CHARGING To power on and off the adapter, you don’t need to press and hold any button for several seconds. Just short press the Pairing Button and the PTT Button simultaneously, and you will get quick on-andoff convenience. 4.1 Powering On Press and hold the Pairing Button and the PTT Button at the same time for about 1 second to turn the power on. When the power is on, the blue LED light turns on. 4.
English 4.4 Low Battery Warning When the battery is running low, the red LED light will flash.
5. PAIRING THE SR10i WITH BLUETOOTH DEVICES 5.1 Bluetooth Headset Pairing 1. Turn on your Bluetooth headset and enter pairing mode, following the Bluetooth headset manual. 2. Turn on the SR10i and press and hold the Pairing Button for 5 seconds until the LED flashes red and blue alternatively. 3. When the pairing is successful, the blue LED flashes slowly. 5.2 Bluetooth Mobile Phone Pairing 1. Turn on the SR10i and press and hold the Pairing Button for 8 seconds until the red LED is rapidly flashing.
English 6. USING THE SR10i 6.1 Using Two-way Radios 1. When SR10i is turned on and connected with a hand held twoway radio, the audio from the two-way radio will be directly sent to your Bluetooth headset. You can use the Bluetooth headset as a handsfree device for the two-way radio. 2. To talk using the two-way radio through SR10i, press and hold the PTT Button until you finish talking.
6.2 Ports and Cables The SR10i has one Main Port and two AUX ports for wired connection with other devices. Below is a list of compatible cables and devices: • Main: 6-pin Hirose connector type two-way radio cable * • AUX1: 3.5mm 3-pole audio jack cable for GPS ** • AUX2: 3.5mm 3-pole audio jack cable for GPS or 3.5mm 4-pole mobile phone cables for mobile phones * For information on model specific 6-pin Hirose connector type twoway radio cables, please visit www.senabluetooth.com.
6.3 Using Mobile Phone 6.3.2 For Wired Connection Users can connect a mobile phone to the AUX2 Port by wire in order to use Bluetooth handsfree. In this case, the SR10i combines audio from the Main Port and the AUX2 Port together and redirects to the Bluetooth headset. For information on mobile phones and cable compatibility, please visit www. senabluetooth.com/support. 6.
Even if there is no incoming sound from the wired devices, users can also connect the SR10i manually to the Bluetooth headset by double tapping the PTT Button. Users can also double tap the PTT Button while the SR10i is already connected to the Bluetooth headset to prevent it from disconnecting itself automatically. To disconnect the SR10i from the Bluetooth headset in this case, the user needs to double tap the PTT Button again.
2. Within 5 seconds, press the Pairing Button again to confirm reset. The SR10i will be restored to factory settings and switched off automatically after the blue LED flashes several times. 3. If you don't press the Pairing Button within 5 seconds, the reset attempt is canceled and the SR10i returns to standby mode. 6.6 Fault Reset If the SR10i is not working properly or is in a faulty status for any reason, you may reset by pushing the small reset button at the top of the SR10i main unit.
7.
English BATTERY INFORMATION The SR10i has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard.
MAINTENANCE AND CARE The SR10i should be treated with care and the following suggestions will help you protect your warranty coverage. 1. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. 2. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and wrap or melt certain plastics. 3. Do not store the device in cold areas.
English DISPOSAL The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
CERTIFICATION AND SAFETY APPROVALS • FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: - This device may not cause harmful interference. - This device must accept any interference received. Including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
• FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
information please consult www.senabluetooth.com. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. • Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s).
English WAIVER AND GENERAL RELEASE By using the SR10i, you waive any legal rights including the right to sue. Please read the following carefully before using the device. If you do not accept all terms of this agreement, you should immediately return the product for a full refund. By using the SR10i, you agree to be bound to this agreement and forfeit the right to sue.
By way of purchasing this Device and not returning it for a full refund (see below), you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorneys fees) and holding Sena harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any Vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Device under any circumstances or conditions and irrespective of
29 English discomfort, loss, injury, death, damages to or in respect to any person or property however caused, WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which may hereafter accrue to you on some future date as a result of said use, to the fullest extent permitted by law. 2. You fully understand and assume the risks in using the Device, including risk of negligent acts or omissions by others. 3.
foreseeable or unforeseeable causes. You hereby assume all risks and dangers and all responsibility for any losses and/or damages, whether caused in whole or in part by the negligence or other conduct of others, including the Company. 5. You confirm that you have read this release of liability and fully understand its terms and that you have given up substantial rights by not returning the Device for a full refund (see refund option below). • Two-Year Limited Warranty Sena Technologies, Inc.
Limited warranty service may be obtained by delivering the Product to Sena or to the international distributor it was purchased through and providing proof of purchase or receipt date. Customer agrees to insure the Product or assume the risk of loss or damage in transit, to prepayshipping charges to Sena, and to use the original shipping container or equivalent.
OF ANTICIPATED PROFITS OR BENEFITS RESULTING FROM, OR ARISING OUT OF, OR IN CONNECTION WITH THE USE OF FURNISHING OF EQUIPMENT, PARTS OR SERVICES HEREUNDER OR THE PERFORMANCE, USE OR INABILITY TO USE THE SAME, EVEN IF SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL SENA OR ITS DEALERS TOTAL LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT.
English WARNING Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. Sena denies any liability should you choose not to respect this warning.
1.0.0 User's Guide for Firmware v1.2 www.senabluetooth.
