SENA MOTORCYCLE MESH COMMUNICATION SYSTEM QUICK START GUIDE 2.0.
Downloadable Sena Software Download the SENA MOTORCYCLES App at Google Play Store or App Store. SENA MOTORCYCLES Download the following items at sena.com. Firmware Sena Device Manager • Firmware upgrade • Device configuration setting Quick Start Guide, User’s Guide Follow us on Facebook, YouTube, Twitter and Instagram to check the latest information and helpful tips. SENA Technologies, Inc. Customer Support: sena.
Product Details Mesh Intercom Antenna Jog Dial Mesh Intercom Button Phone Button Status LED Charging LED DC Power Charging & Firmware Upgrade Port Speaker and Microphone Port
Installation • For more information about installation, refer to the User’s Guide.
Installing the Speakers 1 2 Installing the Wired Boom Microphone 1 1 3 2 1 2 2
Installing the Wired Microphone 1 2 1 2 3 2 1 Mesh Intercom Antenna Pull the Mesh Intercom Antenna outwards slightly to unfold it.
NOTICE • This Quick Start Guide (Version 2.0) explains how to operate the SPIDER ST1 with firmware version 2.0 or higher. • For the operation of the SPIDER ST1 with a firmware version lower than 2.0, refer to the SPIDER ST1 Quick Start Guide (Version 1.1.0) or lower.
Basic Operations Powering On Powering Off HOLD TAP 1x 1s Volume Up Volume Down ROTATE ROTATE R L Checking the Battery Level = Powering On = =
Phone Pairing ① HOLD Blinking 5s ② Select SPIDER ST1 in the list of Bluetooth devices detected. “Phone pairing” Bluetooth SPIDER ST1 Pi Device B • For more information on phone pairing, refer to the User’s Guide.
Using the Phone Answer a Call End a Call TAP TAP 1x Reject a Call 1x Voice Dial HOLD TAP 2s 1x Music Control Play/Pause HOLD 1s Track Forward Track Backward ROTATE R ROTATE L in stand-by mode
Mesh Intercom™ Open Mesh™: communication within the same channel. Group Mesh™: communication within the same private group. • For more information on Mesh Intercom, refer to the User’s Guide. Mesh Intercom On Blinking TAP “ Mesh intercom on, Open Mesh, channel 1” TAP “ Mesh intercom off” 1x Mesh Intercom Off 1x Note: When Mesh Intercom is on, the SPIDER ST1 will automatically connect to nearby SPIDER ST1 users and the headset will be in Open Mesh (default: channel 1) initially.
Open Mesh Channel Setting (Default: channel 1) in Open Mesh Using the Button ① Enter into the Channel Setting. “ Channel setting, 1” TAP 2x ② Navigate between channels. (1 2 ••• 8 9 Exit 1 •••) ROTATE R or “ #” ROTATE L ③ Save the channel. TAP 1x “ Channel is set, channel #” Using the SENA MOTORCYCLES App You can select the channel through the SENA MOTORCYCLES App.
Group Mesh Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset. 1) Creating a Group Mesh Creating a Group Mesh requires two or more Open Mesh users. Open Mesh Group Mesh B You You B C C ① Users (You, B, and C) enter into Mesh Grouping to create a Group Mesh.
2) Joining an Existing Group Mesh One of the current users in an Existing Group Mesh can allow new users (one or more) in Open Mesh to join the Existing Group Mesh. Existing Group Mesh Open Mesh F You Existing Group Mesh You F D B D C B C ① One (You) of the current users in the Existing Group Mesh and new users (D and F) in Open Mesh enter into Mesh Grouping to join the Existing Group Mesh.
Enable/Disable Mic (Default: Enable) Users can enable/disable the microphone when communicating in a Mesh Intercom. HOLD 1s Reset Mesh If a headset in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1).
Configuration Menu Accessing the Configuration Menu HOLD “ Configuration menu” 5s Navigating Between Menu Options ROTATE R Execute Menu Options TAP 1x or ROTATE L
Troubleshooting Factory Reset HOLD ① 10s “ Factory reset” ② 1x TAP “ Headset reset, good-bye” Fault Reset Note: Fault Reset will not restore the headset to the factory default settings.
Quick Reference TYPE OPERATION BUTTON COMMANDS HOLD 1s Power on / Power off Basic Operations Volume up / Volume down Mobile Phone TAP 1x ROTATE R or TAP Answer phone call 1x End phone call 1x Reject phone call Voice Dial Play/Pause music TAP HOLD 2s TAP 1x HOLD 1s Track forward ROTATE Track backward ROTATE R Music L ROTATE L
TYPE OPERATION BUTTON COMMANDS TAP Mesh Intercom on/off 1x Channel setting 2x Mesh Grouping Mesh Intercom™ Reset Mesh Enable/Disable Mic TAP HOLD 5s HOLD 8s HOLD 1s 2.0.