User`s guide

English
SPH10H
17
Voice Prompt
“PLC setting”
Factory Default Enable
Enable Tap the Phone Button
Disable Tap the Jog Dial
Voice Prompt
“Delete all pairings”
Factory Default N/A
Execute Tap the Phone Button
Rotate Jog Dial Tap Phone Button Tap Jog Dial
VOX Phone Enable Disable
VOX Intercom Enable Disable
Voice Prompt Enable Disable
PLC Setting Enable Disable
Delete All Pairings Execute N/A
Exit Configuration Execute N/A
Voice Conguration Menu & Button Operations
Voice Prompt
“Exit conguration”
Factory Default N/A
Enable Tap the Phone Button
9.4 Enabling/Disabling PLC (Packet Loss
Consealment)
The PLC (Packet Loss Concealment) algorithm is
enabled from the factory. It improves the audio quality
of the intercom and mobile phone handsfree in the
presence of data packet errors within the Bluetooth
link. It is recommend that this setting is always enabled.
However, if you feel that the audio from the intercom or
mobile phone is distorted in certain circumstances, you
may able to disable this setting and check it.
9.5 Delete All Bluetooth Pairing Information
To delete all Bluetooth pairing information of the
SPH10H, rotate the Jog Dial until you hear a voice
prompt, “Delete all pairings”, and tap the Phone
Button to confirm. Taping the Jog Dial is not available
for this setting.
9.6 Exit Voice Conguration Menu
To exit voice configuration menu and get back to stand-
by mode, rotate the Jog Dial until you hear a voice
prompt, “Exit conguration”, and tap the Phone
Button to confirm. Taping the Jog Dial is not available
for this setting.