www.senabluetooth.
SPH10H Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SPH10H™, SMH5™, SPH10™, SPH10S™, SPH10H™, SR10™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod touch are registered trademarks of Apple Inc.
SPH10H CONTENTS 1. INTRODUCTION 2. PACKAGE CONTENTS 3. INSTALLING THE SPH10H ON YOUR HELMET 4. POWERING ON/OFF AND CHARGING 3 4 5 6 4.1 Powering On 6 4.2 Powering Off 6 4.3 Charging 6 4.4 Low Battery Warning 7 4.5 Checking the Battery Level 7 5. VOLUME ADJUSTMENT 7 6. PAIRING THE SPH10H WITH BLUETOOTH DEVICES 8 6.1 Mobile Phone Pairing 8 6.2 Bluetooth Stereo Device Pairing 8 6.3 Bluetooth GPS Navigation Pairing 9 6.4 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter 11 7.
SPH10H Thank you for choosing the Sena SPH10H, Bluetooth Stereo Headset and Intercom for Half Helmets. With the SPH10H, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SPH10H is compliant with the Bluetooth 3.
SPH10H 2.
SPH10H • Cigarette Charger • Stereo Audio Cable • Tab Insertion Tool 3. INSTALLING THE SPH10H ON YOUR HELMET English • USB Power and Data Cable 1. Insert the two plastic tabs of the SPH10H on the headset ear pads into the left and right side of your helmet. You may use the Tab Insertion Tool located in the package to help insert the plastic tabs into your helmet. Place the Tab Insertion Tool against the tab side with velcro. Insert the tab and insertion tool at the same time into the helmet.
SPH10H 2. Please make sure that one of the headset ear pads with the microphone is located on the left side of your helmet. 4. POWERING ON/OFF AND CHARGING To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. 4.1 Powering On 3.
SPH10H 4.4 Low Battery Warning 4.5 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on. 4.5.1 LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30% 5.
SPH10H 6. PAIRING THE SPH10H WITH BLUETOOTH DEVICES Before using the SPH10H Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specific Bluetooth GPS, and with other Sena Bluetooth headsets. This pairing operation is only required once for each Bluetooth device.
SPH10H 1. I f Bluetooth connection between the headset and a mobile phone is disconnected, tap the Phone Button to recover the Bluetooth connection immediately. 2. If Bluetooth connection between the headset and a media player is disconnected, press the Jog Dial for 1 second to recover the Bluetooth connection and play. 6.3 Bluetooth GPS Navigation Pairing You can listen to voice instruction from Bluetooth GPS navigation.
SPH10H The pairing diagram for multipoint GPS pairing is shown in the figure below. support mobile phone bridging over Bluetooth, you can pair the mobile phone to the GPS to use your mobile phone. Please refer to the user’s guide of your GPS for details. HFP Smart Phone GPS HFP + Mobile Phone Pairing A2DP Mobile Phone HFP Mobile Phone + Pairing (A2DP) HFP SPH10H Multipoint Pairing GPS Multipoint GPS Pairing SPH10H GPS Pairing as Mobile Phone 6.3.
SPH10H The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems. If you pair the SPH10H with a SR10 by multipoint pairing, the SPH10H is able to have two HFP devices at the same time: mobile phone and Sena SR10. 1. Turn on the headset and press the Jog Dial for 5 seconds until the red LED is rapidly flashing and you hear multiple beeps. 2.
SPH10H 7. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE Smart Phone HFP + Mobile Phone Pairing A2DP Wired Connection HFP SPH10H If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SPH10H for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SPH10H to their smart phones only with one selective profile: A2DP stereo for music or HFP for phone call.
SPH10H 7.2 HFP for Phone Call Only 1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps. 2. Within 2 seconds, tap the Phone Button again, then the LED turns to blue flashing and the beeps turn to multiple mid-tone beeps. You will hear a voice prompt saying “Phone selective pairing”. 3. Search for Bluetooth devices on your smartphone. Select the Sena SPH10H in the list of devices detected on your phone. 4.
SPH10H 5. The intercom pairing queue is ‘Last-Come, FirstServed’. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second intercom friend, and third intercom friend. A B D C Note: Pairing A & B 4. Y ou can make other pairings between the headset A and C, and between the headset A and D by following the same procedure as above.
SPH10H You can set the configuration of the SPH10H by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. 2. Rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus. You will hear voice prompts for each menu items as below. 3.
SPH10H you can answer the phone by saying “Hello” or any other word loudly. This is enabled from the factory but you can disable this. If this mode is disabled, you have to tap the Jog Dial or the Phone Button to answer an incoming call. 9.
SPH10H Voice Prompt “PLC setting” Factory Default Enable Enable Tap the Phone Button Disable Tap the Jog Dial The PLC (Packet Loss Concealment) algorithm is enabled from the factory. It improves the audio quality of the intercom and mobile phone handsfree in the presence of data packet errors within the Bluetooth link. It is recommend that this setting is always enabled.
SPH10H 10. FUNCTION PRIORITY The SPH10H operates in the following order of priority: (highest) Mobile phone, Intercom, Stereo music by audio cable (lowest) Bluetooth stereo music A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by intercom call, and intercom conversation is interrupted by incoming mobile phone call. 11.
SPH10H 3. To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise. Note: 2. To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep. Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged from the clamp unit to play music by Bluetooth.
SPH10H 12. MOBILE PHONE CALL MAKING AND ANSWERING 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call. 2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering is enabled. 3. To end a call, tap the Phone Button or press the Jog Dial for 2 seconds until you hear a beep, or wait for the called person to end the call. 4.
SPH10H 13.1 Start and End Two-way Intercom 1. You can start an intercom conversation with one of any intercom friends by tapping the Jog Dial: single tapping to intercom with the first intercom friend, double tapping with the second intercom friend, and triple tapping with the third intercom friend.
SPH10H Button. When you hang up the phone call, the intercom will automatically be recovered. b. To reject the phone call and stay on the intercom conversation, press the Jog Dial for 2 seconds until you hear a beep. U nlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by an incoming mobile call. 2.
SPH10H English 14. THREE-WAY CONFERENCE INTERCOM 14.
SPH10H 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). 4. Now you (A) and two SPH10H intercom friends (B & C) are having a three-way conference intercom. (A) First Friend (B) (A) Second Friend (C) 14.2 End Three-way Intercom First Friend (B) Second Friend (C) 3.
SPH10H Jog Dial Operation Press for 1” Result Disconnect (B) & (C) Single tap Disconnect (B) Double tap Disconnect (C) End Three-way Intercom 15. FOUR-WAY CONFERENCE INTERCOM English However, you still have the intercom connection with your second intercom friend (C). 15.1 Start Four-way Intercom You can have four-way conference intercom with three other SPH10H users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as above in section 14.
SPH10H intercom or just disconnect a single intercom connection. 1. Press the Jog Dial for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B) and (C). 2. Tap or double tap the Jog Dial to disconnect the intercom connection with one of the two intercom friends accordingly.
SPH10H When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal. In this case, you have to try again later. 18. INTERCOM RECONNECTION If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected.
SPH10H 20. FAULT RESET When the SPH10H is not working properly or is in a faulty status for any reason, you may reset the system by pushing the pin-hole reset button on the back of the left headset main unit. 1. Detach the velcro pad inside of the left headset to see a set-screw on the main module under the ear flap. 2. Turn the set-screw to the left to take the module apart from the ear flap. 3.
SPH10H The SPH10H supports firmware upgrade function. Please visit Sena Bluetooth web site at www. senabluetooth.com to check the latest software downloads. 22. CASE STUDY English 21. FIRMWARE UPGRADE Case 1 • iPhone for mobile phone call and stereo music streaming •ZumoTM 550 or ZumoTM 220 for GPS voice instruction •SPH10H for two-way intercom iPhone Mobile Call Pairing: 6.1 Music Intercom Conversation SPH10H Pairing: 8.1 GPS Voice SPH10H Pairing: 6.3.
SPH10H Case 2 Case 3 • iPhone for mobile phone call and stereo music streaming • ZumoTM 660/665 for GPS voice instruction • SPH10H for two-way intercom •iPhone for mobile phone call via Zumo 660/665 • ZumoTM 660/665 for GPS voice instruction and stereo music streaming •SPH10H for two-way intercom Pairing: Refer to ZumoTM 660/665 manual Mobile Call iPhone ZumoTM 660/665 iPhone Mobile Call Pairing: 6.1 Music Intercom Conversation SPH10H Pairing: 8.1 Mobile Call Music Pairing: 6.
SPH10H Case 4 Case 5 •iPhone for mobile phone call •iPod Touch for stereo music streaming •TomTom® Rider2 for GPS voice instruction •SPH10H for two-way intercom Feature Phone iPhone Mobile Pairing: 6.1 Call SPH10H Intercom Conversation Music Pairing: 8.1 Pairing: 6.2 SPH10H Intercom Conversation Pairing: 8.1 SPH10H English •Feature phone for mobile phone call •iPod Touch for stereo music streaming • Two other SPH10Hs for three-way conference intercom Mobile Pairing: 7.
SPH10H Case 6 •iPhone for mobile phone call and stereo music streaming •Sena SR10 for two-way radio, GPS voice instruction, and radar detector alarm •SPH10H for two-way intercom iPhone Two-way radio Mobile Call Pairing: 6.1 Music Wired Connection Tow-way radio GPS Voice Alarm SPH10H Pairing: 6.4 Intercom Pairing: 8.
SPH10H The SHM10 should be treated with care and the following suggestions will help you protect your warranty coverage. 1. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. 2. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and wrap or melt certain plastics. 3. Do not store the device in cold areas.
SPH10H DISPOSAL CERTIFICATION AND SAFETY APPROVALS The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
SPH10H CE Declaration of Conformity FCC RF Exposure Statement Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
SPH10H Bluetooth License The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners. The SPH10H is compliant with and adopts the Bluetooth® Specification 3.0 and has successfully passed all interoperability tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth®-enabled products is not guaranteed.
SPH10H By way of purchasing this Device and not returning it for a full refund (see below), you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorney’s fees) and holding Sena harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any Vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Device under any circumstances or conditions and irrespe
SPH10H before or during the use of the Device. 4.
SPH10H SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL SENA OR ITS DEALERS TOTAL LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT. Limitation of Liability IF YOU ARE UNWILLING TO ACCEPT AND AGREE TO THE ABOVE CONDITIONS, YOU MAY RETURN THIS DEVICE TO SENA FOR A FULL REFUND, PROVIDED THAT YOU DO SO NO LATER THAN 14 BUSINESS DAYS FOLLOWING THE PURCHASE OF THE DEVICE AND SUBJECT TO THE WRAPPING BEING INTACT. WHEN DOING SO, PLEASE REFER TO THIS SECTION.
SPH10H WARNING Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. If the simultaneous use of both ear speakers while riding a motorcycle is prohibited by your local law, please use only a single ear speaker while riding. Sena denies any liability should you choose not to respect this warning.
1.0.0 www.senabluetooth.com User's Guide for Firmware v4.
