Bluetooth® Stereo Headset & Intercom with Built-in FM Tuner for Half Helmets www.sena.
SPH10H-FM © 1998-2014 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5- FM™, SPH10™, EXPAND™, SPH10H™, SPH10S™, SR10™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena .
SPH10H-FM 1. INTRODUCTION.......................................................................... 5 2. PACKAGE CONTENTS............................................................... 6 3. INSTALLING THE SPH10H-FM ON YOUR HELMET................ 7 4. POWERING ON/OFF AND CHARGING...........................................9 4.1 4.2 4.3 4.4 4.5 Powering On.......................................................................................9 Powering Off......................................................
SPH10H-FM 18. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT....................................................... 37 19. INTERCOM FAILURE................................................................ 38 • Product Storage and Management.....................................................56 • Product Use..........................................................................................56 • Battery.........................................................................................
SPH10H-FM Thank you for choosing the Sena SPH10H-FM, Bluetooth Stereo Headset & Intercom with Built-in FM Tuner for Half Helmets. With the SPH10H-FM, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SPH10H-FM is compliant with the Bluetooth 3.
SPH10H-FM 2.
SPH10H-FM • Cigarette Charger • Microphone Sponges • Tab Insertion Tool 3. INSTALLING THE SPH10H-FM ON YOUR HELMET English • USB Power and Data Cable Before installing the SPH10H-FM, remove the main unit from the earpad. 1. Pull the connector cover upward to unlock the connector and pull out the speaker cable. 2. Slide upward the main unit to remove from the earpad.
SPH10H-FM 3. Insert the two plastic tabs of the SPH10H-FM on the headset earpads into the left and right side of your helmet. You may use the tab insertion tool located in the package to help insert the plastic tabs into your helmet. Place the tab insertion tool against the tab side with velcro. Insert the tab and tab insertion tool at the same time into the helmet. When the tab is in the proper position, slide the tab insertion tool out. The velcro will now hold the tab securely in place. 5.
SPH10H-FM 4. POWERING ON/OFF AND CHARGING English 8. Tuck in the cable that connects left and right earpads, between the helmet shell and protective padding or inside the helmet. To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. 4.1 Powering On Press the Jog Dial and the Phone Button at the same time for about 1 second to power on.
SPH10H-FM 4.3 Charging 4.5 Checking the Battery Level • To charge the SPH10H-FM, use the USB power and data cable included in the package by plugging into computer’s USB port or USB wall charger. USB wall charger is not included in the package, but you can use any USB wall charger in the market. • The USB power and data cable is also used for firmware upgrade of the SPH10H-FM.
SPH10H-FM You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even when you turn off and on the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume when you hear Bluetooth MP3 music. So you can always maintain the preferred optimum volume level for each audio source. 6.
SPH10H-FM detected on the mobile phone. 3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 4. The mobile phone confirms that pairing has completed and the SPH10H-FM is ready to use. You will hear a voice prompt from the SPH10H-FM saying “Your headset is paired”. 5. If the pairing process is not completed within three minutes, the SPH10H-FM will return to stand-by mode. 6.
SPH10H-FM Note: 1. I f Bluetooth connection between the headset and a mobile phone is disconnected, tap the Phone Button to recover the Bluetooth connection immediately. 2. I f Bluetooth connection between the headset and a media player is disconnected, press the Jog Dial for 1 second to recover the Bluetooth connection and play. 6.4 Bluetooth GPS Navigation Pairing You can listen to voice instruction from Bluetooth GPS navigation.
SPH10H-FM The pairing diagram for multipoint GPS pairing is shown in the figure below. GPS HFP Mobile Phone + Pairing (A2DP) Smart Phone HFP + Mobile Phone Pairing A2DP HFP SPH10H-FM HFP SPH10H-FM Multipoint Pairing Mobile Phone GPS Pairing as Mobile Phone GPS Multipoint GPS Pairing 6.4.
SPH10H-FM The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems. If you pair the SPH10H-FM with a SR10 by multipoint pairing, the SPH10H-FM is able to have two HFP devices at the same time: mobile phone and Sena SR10. 1. Turn on the headset and press the Jog Dial for 5 seconds until the red LED is rapidly flashing and you hear multiple beeps. 2.
SPH10H-FM 7. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE Smart Phone Two-way Radio HFP Mobile Phone + Pairing A2DP HFP SPH10H-FM Multipoint Pairing Wired Connection Sena SR10 Wired Connection GPS Wired Connection Radar Detector Parallel Connection of SR10 and Mobile Phone by Bluetooth Multipoint Pairing If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SPH10H-FM for A2DP stereo music only or for mobile phone handsfree only.
SPH10H-FM 7.2 HFP for Phone Call Only 1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps. 2. Within 2 seconds, tap the Phone Button again, then the LED turns to blue flashing and the beeps turn to multiple mid-tone beeps. You will hear a voice prompt saying “Phone selective pairing”. 3. Search for Bluetooth devices on your smartphone. Select the Sena SPH10H-FM in the list of devices detected on your phone. 4.
SPH10H-FM 5. The intercom pairing queue is ‘Last-Come, FirstServed’. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second intercom friend, and third intercom friend. A B D C Note: Pairing A & B 4. Y ou can make other pairings between the headset A and C, and between the headset A and D by following the same procedure as above.
SPH10H-FM You can set the configuration of the SPH10H-FM by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. 2. Rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus. You will hear voice prompts for each menu items as below. 3.
SPH10H-FM 2. Tap the Phone Button, and you will hear a voice prompt saying “Speed dial one” and “Phone connected”. 3. Rotate the Jog Dial to select one of three speed dial numbers and you hear a voice prompt saying “Speed dial (#)”. 4. Call a phone number you want to assign and you will hear a voice prompt saying “Save speed dial (#)”. The phone number is automatically assigned to the selected speed dial number. Then the phone call will hang up before being connected. 5.
SPH10H-FM 9.4 Enabling/Disabling Voice Prompts Voice Prompt English If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by speaking any word loudly enough.The most effortless way to trigger intercom VOX is to blow into the microphone as if blowing dust off the microphone. If you start an intercom conversation by VOX, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds.
SPH10H-FM 9.6 RDS AF setting (Radio Data System: Alternative Frequencies) (Factory Default: Disabled) Voice Prompt “RDS AF setting” Factory Default Disable Enable Tap the Phone Button Disable Tap the Jog Dial RDS AF allows a receiver to re-tune to a different frequency providing the same station has an additional frequency. In RDS AF, the receiver will “re-tune” to the second frequency location when the first signal becomes too weak.
SPH10H-FM Tap Phone Button Tap Jog Dial Speed Dial Execute N/A VOX Phone Enable Disable VOX Intercom Enable Disable Voice Prompt Enable Disable Sidetone Enable Disable RDS AF Setting Enable Disable Delete All Pairings Execute N/A Exit Configuration Execute N/A Voice Configuration Menu & Button Operations 10.
SPH10H-FM 11. STEREO MUSIC You can listen to stereo music from your Bluetooth wireless audio device. The Bluetooth audio device must be paired with the SPH10H-FM by following the “Bluetooth Stereo Device Pairing” procedures described in the 6.3 chapter. The SPH10H-FM supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SPH10H-FM to remotely control music playback.
SPH10H-FM 12.1 Mobile Phone Call Making and Answering 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call. 2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering is enabled. 3. To end a call, tap the Phone Button or press the Jog Dial for 2 seconds until you hear a beep, or wait for the called person to end the call. 4.
SPH10H-FM 12.2 Speed Dialing You can quickly make a phone call by using the voice speed dial menu. 1. To enter into the voice speed dial menu, double tap the Phone Button and you will hear a mid-tone single beep and a voice prompt saying “Speed dial”. 2. Rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus. You will hear voice prompts for each menu items. 3.
SPH10H-FM 13.1 Start and End Two-way Intercom 1. You can start an intercom conversation with one of any intercom friends by tapping the Jog Dial: single tapping to intercom with the first intercom friend, double tapping with the second intercom friend, and triple tapping with the third intercom friend.
SPH10H-FM 13.2 Intercom and Mobile Phone Call 13.3 Intercom and GPS 1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can choose whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and stay on the intercom conversation. a. To answer the phone call and stop the intercom conversation, tap the Jog Dial or the Phone Button.
SPH10H-FM 13.4 Intercom and Two-way Radio English As described in 6.5 of this user's guide, you can use a two-way radio and SPH10H-FM Bluetooth intercom simultaneously by using the Sena SR10, a Bluetooth Two-way Radio Adapter, along with the SPH10HFM. Incoming audio from the two-way radio is not interrupting an intercom conversation but is heard in background.
SPH10H-FM 14. THREE-WAY CONFERENCE INTERCOM 14.1 Start Three-way Intercom Pa iri g 30 rin First Friend (B) (A) i Pa ng You (A) can have a three-way conference intercom with two other SPH10H-FM friends (B & C) by establishing two intercom connections at the same time.
SPH10H-FM (A) First Friend (B) Second Friend (C) 14.2 End Three-way Intercom When you are a member of an active three-way conference intercom, you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1. Press the Jog Dial for 1 second until you hear a beep to terminate three-way conference intercom completely. It terminates both intercom connections with (B) and (C). 2.
SPH10H-FM 15. FOUR-WAY CONFERENCE INTERCOM 15.1 Start Four-way Intercom You can have four-way conference intercom with three other SPH10H-FM users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as above in section 14.1, a new participant (D), who is an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C).
SPH10H-FM You can have an intercom conversation with nonSena Bluetooth headsets using the Universal Intercom function. Non-Sena Bluetooth headsets can be connected to the Sena Bluetooth headset if they support the Bluetooth Hands-Free Profile (HFP). The working distance may differ depending on the performance of Bluetooth headset that it is connected to. In general, it is shorter than normal intercom distance since it uses the Bluetooth Hands-Free Profile. 16.
SPH10H-FM 16.3 Three-way Universal Intercom You may make a three-way Universal Intercom connection with two SPH10H-FMs and one non-Sena Bluetooth headset. If the intercom connection is made, all headsets connected cannot use the mobile phone call function since the connection between the headset and the phone is disconnected temporarily. If you disconnect the intercom call, the mobile phone connection is made again automatically so that you can use a mobile phone call function.
SPH10H-FM (A) (B) (C) 5. You may disconnect the three-way Universal Intercom using the same way as you do in normal three-way intercom. Please refer to section, 14.2 “End Three-way Intercom”. 16.4 Four-way Universal Intercom You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three SPH10HFMs and one non-Sena Bluetooth headset or 2) two SPH10H-FMs and two non-Sena Bluetooth headsets.
SPH10H-FM 2. The other SPH10H-FM (C) may join the intercom by making an intercom call to you (A). (A) 4. Now two SPH10H-FM headsets (A & C) and two nonSena Bluetooth headsets (B & D) are connected with the four-way Universal Intercom. (C) (A) (D) (B) 3. The non-Sena Bluetooth headset (D) may join the conference intercom by making an intercom call to the SPH10H-FM (C).
SPH10H-FM You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversation. To start or terminate sharing music, press and hold the Jog Dial for 1 second during an intercom conversation until you hear a double beep and you and your intercom friend will listen to or terminate sharing music.
SPH10H-FM 19. INTERCOM FAILURE When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal. In this case, you have to try again later. 38 20. INTERCOM RECONNECTION If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected.
SPH10H-FM You can answer the incoming call and intercom while still listening to the FM radio. 21.1 FM Radio On / Off To turn on the FM radio, press and hold the Phone Button for 2 seconds until you hear a mid-tone double beep sound. You will then hear a voice prompt saying “FM on”. In order to turn off the FM radio, press and hold the Phone Button for 2 seconds until you hear a voice prompt saying “FM off”. When you power off, the SPH10H-FM will remember the last station frequency.
SPH10H-FM Note: You can save FM stations to presets before using FM radio. Connect SPH10H-FM to your PC and open the Sena Device Manager. It allows you to save FM station frequencies up to 10 presets on the SPH10H-FM setting menu. 21.4 Scan and Save “Scan” is the function that searches from the current station frequency upward for stations in a whole range of FM frequencies. To use the scan function, please follow the procedures below: 1. Double tap the Phone Button.
SPH10H-FM 21.6 Region Selection Region Frequency Range Step Worldwide 76.0 ~ 108.0 MHz ± 100 kHz Americas 87.5 ~ 107.9 MHz ± 200 kHz Asia 87.5 ~ 108.0 MHz ± 100 kHz Australia 87.5 ~ 107.9 MHz ± 200 kHz Europe 87.5 ~ 108.0 MHz ± 100 kHz Japan 76.0 ~ 90.0 MHz ± 100 kHz 22. RESET TO FACTORY DEFAULT SETTINGS English You can select proper FM frequency region from Sena device manager.
SPH10H-FM 23. FAULT RESET When the SPH10H-FM is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The SPH10H-FM will be switched off after which time, you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. 42 24.
SPH10H-FM English 25. SENA BLUETOOTH CONNECTION CASE STUDIES Case 1 Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Multipoint Pairing 3.
SPH10H-FM Case 2 GPS - Mobile Phone Pairing Bluetooth GPS* Mobile Phone Pairing Intercom Pairing 44 Mobile Phone Bluetooth Pairing Procedure 1. GPS - Mobile Phone Pairing 2. Mobile Phone Pairing 3.
SPH10H-FM Case 3 Mobile Phone Pairing Intercom Pairing Multipoint Pairing Mobile Phone English Bluetooth GPS* Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Multipoint Pairing 3.
SPH10H-FM Case 4 Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Mobile Phone Pairing 3.
SPH10H-FM Case 5 Mobile Phone Pairing GPS Intercom Pairing Mobile Phone Pairing Motorcycle Bluetooth Audio System* English Mobile Phone Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Mobile Phone Pairing 3.
SPH10H-FM Case 6 Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Mobile Phone Pairing 3. Multipoint Pairing 4.
SPH10H-FM Case 7 English Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Multipoint Pairing 3.
SPH10H-FM Case 8 MP3 Player Mobile Phone Pairing Mobile Phone 50 Bluetooth Pairing Procedure 1. GPS - Mobile Phone Pairing 2. Mobile Phone Pairing 3. Mobile Phone Pairing 4.
SPH10H-FM Case 9 GPS Mobile Phone Pairing Multipoint Pairing Mobile Phone Pairing Two-way Radio English Mobile Phone Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Mobile Phone Pairing 3. Mobile Phone Pairing 4. Multipoint Pairing 5.
SPH10H-FM Case 10 Bluetooth Pairing Procedure 1. Mobile Phone Pairing 2. Mobile Phone Pairing 3. Mobile Phone Pairing 4. Multipoint Pairing 5.
SPH10H-FM Button Phone Button + Jog Dial Description LED Power-on 1 sec Solid blue Power-off Tapping Solid red Descending beeps 5 sec Blue & red High tone alternatively multiple beeps flashing MP3, GPS pairing 5 sec Blue & red High tone alternatively multiple beeps flashing Call transfer 2 sec - High tone single beep 12 sec Solid red High tone double beeps Factory reset Jog Dial within 5 sec to confirm reset - Description Duration 5 sec Intercom pairing Beep Ascending beeps Mob
SPH10H-FM CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
SPH10H-FM Industry Canada Statement This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
SPH10H-FM SAFETY INFORMATION Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to property. Product Storage and Management • Keep the product free of dust. It may damage mechanical and electronic parts of the product. • Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product.
SPH10H-FM Battery This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make sure to adhere to the following: • In recharging the battery, make sure to use an approved charger provided by the manufacturer. Use of a non-approved charger may cause fire, explosion, leakage, and other hazards may also reduce the life time or performance of the battery. • Store the battery at temperatures of 15°C~25°C (59°F~77°F).
SPH10H-FM PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Limited Warranty Sena Technologies, Inc. (“Sena”) guarantees the product quality based on the technical specification stated in the product manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture.
SPH10H-FM • Risk factors, which may occur when you use the product, may be due to errors of the manufacturer, its agents, or third parties which are involved in the manufacturing. • Risk factors, which may occur when you use the product, may be unforeseeable. Therefore, you must take full responsibility for any damage or loss caused by all risk factors which may occur when using the product. • When you use the product, use good judgment; never use it under the influence of alcohol. 6.
SPH10H-FM Further, Sena will not be liable for any substantial damage not related to the, condition, environment, or malfunction of the product. All risks related with the operation of the product depend entirely on the user regardless of its use by the initial purchaser of a third party. AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. IN ANY CASE, THE TOTAL COMPENSATION LIABILITIES OF SENA OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT BY THE PURCHASER.
SPH10H-FM Warranty Service To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along with proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other relevant information). Take necessary measures to protect the product. In order to get a refund or replacement, you must include the whole package as it was purchased.
1.2.1 www.sena.com User's Guide for Firmware v5.
