Specifications

English
SPH10
7
PAIRING THE SPH10 WITH
BLUETOOTH DEVICES
Before using the SPH10 Bluetooth headset with any of Bluetooth
devices for the first time, you need to do the pairing operation.
It can be paired with Bluetooth mobile phones, Bluetooth audio
devices such as MP3 or GPS, and with other SPH10 Bluetooth
headsets. This pairing operation is only required once for each
Bluetooth device, and the headset will remain paired with the
devices and automatically connects to the paired devices
again when they are within range.
• Mobile Phone Pairing
1. Turn on the headset and press the Phone Button for 5 seconds until
the LED flashes red and blue alternately and you hear multiple beeps.
2. Search for Bluetooth devices on your mobile phone. The
headset will be listed on your mobile phone as SPH10.
3. Enter 0000 for the PIN. (Some mobile phone may not ask for
the PIN number)
4. The headset can be paired as Handsfree or Headset.
the headset is fully charged. It takes about 2.5 hours to be
completely charged.
• Low Battery Warning
When the battery is low, the blinking blue LED in stand-by
mode turns to red and you will hear mid-tone triple beeps.