Specifications

SPH10
6
POWERING ON/OFF AND CHARGING
To power on and off the headset, you don’t need to press and
hold any button for several seconds. Just short press the Jog
Dial and the Phone Button simultaneously, and you will get
quick on-and-off convenience.
• Powering On
Press the Jog Dial and the Phone Button at the same time for
about 1 second to power on. The blue LED turns on and you
will hear ascending beeps.
• Powering Off
Just short press the Jog Dial and the Phone Button
simultaneously, you don’t need to press and hold for a few
seconds. The red LED turns on for a while until it turns off
completely and you will hear descending beeps.
• Charging
The LED turns on red while charging, and turns to blue when
Since SPH10 is mostly exposed on external environment where
noise prevails, microphone can be selected according to the
noise level. For the highly noisy environment, boom-microphone
is recommended allowing microphone to stay near user’s
mouth. For the less-noisy environment, mini microphone is
recommended allowing users to move freely.
• Placing the Headset on Your Ear
The speaker with microphone should be placed on the left ear.
Then you can place earhooks over ears as shown: