Specifications

English
SPH10
19
FIRMWARE UPGRADE
The SPH10 supports firmware upgrade function. Please visit
SENA Bluetooth web site www.senabluetooth.com to check
the latest software downloads.
OPERATION QUICK REFERENCE
Button Description Duration LED Beep
Phone Button +
Jog Dial
Power-on 1 sec Solid blue Ascending beeps
Power-off Tapping Solid red Descending beeps
Phone Button
Mobile phone pairing 5 sec
Blue & red alternatively
flashing
High-tone multiple beeps
MP3, GPS pairing 5 sec
Blue & red alternatively
flashing
High-tone multiple beeps
Voice activated phone
answering setting
8 sec Red flashing Mid-tone single beep
Phone Button to enable
Jog Dial to disable
Factory reset
12 sec Solid red High-tone double beeps
Jog Dial within 5 sec to confirm reset
Make & answer
phone call
Tapping - -
Jog Dial
Intercom pairing
5 sec Red flashing Double-tone beeps
Jog Dial of any one of the two headsets
Voice activated
Intercom setting
8 sec Solid red Mid-tone single beep
Jog Dial to enable
Phone Button to disable
Start/end intercom
conversation
Tapping - -
End conference intercom 1 sec Blue flashing
Mid-tone single beep
Reject incoming call Tapping - -
Call transfer Tapping - High-tone short/long beep
Volume adjustment Rotating - -
Track forward/ back
Rotating w/
pressing
- -
Play/pause
Bluetooth music
1 sec -
Mid-tone double beeps