Specifications

SPH10

Intercom Friend 2

Intercom Friend

2. To terminate an intercom conversation, single tap the Jog

Dial. Any intercom connection with any Intercom Friend will be

terminated by a single tapping. A double or triple tapping will

do nothing in this case.

If this mode is disabled, the only way to answer an incoming

call is to tap the Phone Button.

1. Press and hold the Phone Button for 8 seconds until the red

LED is rapidly flashing. When you do this, after first 5 seconds

you press the button, you will see the headset enters into the

Mobile Phone Pairing sequence, but you have to keep pressing

the button for another 3 seconds until the red LED flashes rapidly.

2. To enable, tap the Phone Button, then the LED shows solid

blue for 2 seconds and you will hear double beeps.

3. To disable, tap the Jog Dial, then the LED shows solid red for

2 seconds and you will hear a single beep.

• Intercom Conversation

1. You can start an intercom conversation with any of Intercom

Friends by tapping the Jog Dial: single tapping to intercom with

the First Intercom Friend, double tapping with the Second

Intercom Friend, and triple tapping with the Third Intercom

Friend.

Terminate

3. When you have an incoming phone call during intercom

conversation, you can choose whether to pick up the call or

not after you hear the ring tone.

4. When you have an incoming intercom call during a mobile