Specifications

English
SPH10
11
USING THE SPH10
• Volume Adjustment
You can easily adjust the volume by rotating the Jog Dial. You
will hear a beep when the volume reaches maximum or
minimum level. The volume is set and maintained separately
at different levels for each function even when you turn off and
on the headset. For example, once you set the mobile phone
conversation volume, it is not changed even if you raise the volume
when you hear Bluetooth MP3 music. So you can always maintain
preferred optimum volume level for each function.
• Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Phone Button
to answer the call.
2. You can also answer the incoming call by loudly speaking
any word of your choice if the Voice Activated Phone Answering
Function of the SPH10 is enabled. (Refer to the next section
for detail.)
3. To reject a call, tap the Jog Dial while the phone is ringing.
4. To transfer a call between the mobile phone and the headset,
tap the Jog Dial during the phone conversation. You will hear
a short/long beep when the call is transferred to the phone/
headset.
5. There are several ways to make a phone call:
- Enter number on your mobile phone keypad and tap the Phone
Button. The call is automatically transferred to the headset.
- Tap the Phone Button in stand-by mode to activate the voice
dialing of your mobile phone. For this, the voice dialing feature
must be available on the mobile phone. Refer to your mobile
phone manual for further instructions.
- To redial the last number, double tap the Phone Button in
stand-by mode.
• Enabling/Disabling Voice Activated Phone Answering
(Factory Default: Disabled)
If this feature is enabled, you can answer incoming calls by
simply saying a word loudly enough. For example, when you
hear a series of beeps by an incoming call, you can answer the
phone by saying “Hello” or any other word loudly. The factory
default setting is disabled. You can enable or disable this mode.