Product Description

ManualsBrandsSENA ManualsComputers & AccessoriesWiFi Adapter

WiFi Adapter Manual

1. Introduction

WiFi Adapter is a device for SENA Bluetooth that charges and provides auto firmware upgrade.

WiFi Adapter can automatically connect to the router through the mobile app, automatically

download the latest firmware available for SENA Device, and can always upgrade to the latest

firmware through comparing firmware version when the user plugs SENA Device into the USB

port to charge.

2. WiFi Adapter features

● Supports WiFi related IEEE 802.11b, IEEE 802.11g, IEEE 802.11n

● Smartphone App for iPhone and Android

● Firmware upgradeable

3. Contents

- Wifi Adapter

4. Product description

Summary of content (9 pages)

PAGE 1
WiFi Adapter Manual 1. Introduction WiFi Adapter is a device for SENA Bluetooth that charges and provides auto firmware upgrade. WiFi Adapter can automatically connect to the router through the mobile app, automatically download the latest firmware available for SENA Device, and can always upgrade to the latest firmware through comparing firmware version when the user plugs SENA Device into the USB port to charge. 2. WiFi Adapter features ● ● ● Supports WiFi related IEEE 802.11b, IEEE 802.11g, IEEE 802.
PAGE 2
5. Getting started a. Power On: Insert the USB port into the charger and insert the Micro USB Port into the “USB power port” b. Connecting to WiFi 1.
PAGE 3
2.
PAGE 4
3. Setting WiFi Docking Station configuration 4. Select the WiFi router to connect to.
PAGE 5
. Enter the password of the selected WiFi router and click “Connect”
PAGE 6
. WiFi Adapter is connecting to the router. 7.
PAGE 7
8. After following these steps, WiFi Adapter should be connected to WiFi. “WiFi status” LED will show blue light if the WiFi router is connected successful and show red light if there has been a failure to connect. 9. To change the router connection, repeat the steps above. 10.
PAGE 8
c. Charging SENA Bluetooth device Plug in the Micro USB to sena Bluetooth device to charge the device. The “Charging status LED” will show red light while charging and turn blue when the device is fully charged. d. Upgrading Firmware Firmware will be upgraded automatically while charging 30K through checking the firmware version and downloading the latest firmware available. “Firmware upgrade status” LED will show blue light when upgrade finished and blink while firmware is upgrading.
PAGE 9
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.