QUICK START GUIDE Speakers ENGLISH DC Power Charging & Firmware Upgrade Port (+) Button Status LED (–) Button Antenna MP3 Port (R) Button Microphone Port Wired Microphone 1.0.
RIDE CONNECTED With the Snowtalk 2, you can communicate with a group while out on the mountain. Want to listen to your favorite music as you ski? Connect to your phone via Bluetooth and listen to your tunes. Bluetooth® 4.1 Four-Way Intercom Intercom up to 700 m (0.
GETTING STARTED 1. This product comes with a Quick Start Guide, which is a basic version of the User’s Guide. A FULL VERSION OF THE USER’S GUIDE CAN BE DOWNLOADED AT SENA.COM. 2. Update this product for free with the latest firmware to fully enjoy the new advanced features built into this product. Visit sena.com to see how to update your product. 3.
GETTING STARTED How to Use This Guide The legend and callouts are here to help you read the illustrations. New technology can be confusing, but we’ve created a simple way to perform actions using illustrations.
QUICK START GUIDE Installation 1 2-1 Left 2-2 3-1 2 1 Right 3-2 4 QUICK START GUIDE
QUICK START GUIDE Sena Outdoor App By simply pairing your phone with your headset, you can use the Sena Outdoor App for quicker, easier setup and management. • App Features - Music, Device settings, Quick Start Guide, and User’s Guide. • Download - Android: Google Play Store > Sena Outdoor - iOS: App Store > Sena Outdoor Sena Device Manager The Sena Device Manager allows you to upgrade firmware and configure settings directly from your PC. Download the Sena Device Manager from sena.com.
QUICK START GUIDE Basic Operations Power On Power Off HOLD = Volume Up = TAP = 1s 1x Volume Down TAP TAP = 1x 1x Checking the Battery Level Visual Method Audible Method Visual method is for when powering the headset on.
QUICK START GUIDE Phone Pairing There are three ways to pair the phone. Initially Pairing the Headset The headset will automatically enter the phone pairing mode when you initially turn on the headset or in the following situation: • Rebooting after executing Factory Reset HOLD = 1s Select Snowtalk 2 Bluetooth = ll Device A Sena Snowtalk 2 v1.0 LED STATUS Device B ...... = PIN NUMBER Note: • The phone pairing mode lasts for 3 minutes. • To cancel pairing, tap the (R) Button.
QUICK START GUIDE Pairing When the Headset Is Turned Off While the headset is off, press and hold the (+) Button and (-) Button for 5 seconds. HOLD = 5s Select Snowtalk 2 Bluetooth = Device A Sena Snowtalk 2 v1.0 LED STATUS Device B ......
QUICK START GUIDE Pairing When the Headset Is Turned On While the headset is on, press and hold the (R) Button for 10 seconds. HOLD = 10s Select Snowtalk 2 Bluetooth = Device A Sena Snowtalk 2 v1.0 LED STATUS Device B ......
QUICK START GUIDE Mobile Phone Answer a Call = End a Call TAP 1x Reject a call HOLD = HOLD = 2s Make a Call with the Voice Dialer 2s HOLD = 3s Music Controls Play/Pause HOLD = 1s Next Track Previous Track HOLD = 1s HOLD = 1s
QUICK START GUIDE Bluetooth Intercom Up to three other people can be paired with the headset for Bluetooth intercom conversations. Intercom Pairing Pairing with Intercom B A A and B C D = HOLD 5s B “Intercom Pairing” A = or TAP 1x B = Flashing blue LED confirms intercoms are paired. LED STATUS Note: Repeat the step above to pair with Intercom Friends C & D.
QUICK START GUIDE Two-Way Intercom Last-Come, First-Served A Start/End Conversation with Intercom Friend 1 B D = YOU A YOU Intercom Friend 1 C Intercom Friend 1 B Start/End Conversation with Intercom Friend 2 Intercom Friend 2 C A YOU D Intercom Friend 1 TAP 1x C Intercom Friend 2 = B Intercom Friend 3 TAP 2x Start/End Conversation with Intercom Friend 3 B = TAP 3x
QUICK START GUIDE Troubleshooting Factory Reset Fault Reset HOLD = 15s = = TAP 1x Note: Fault Reset will not restore the headset to the factory default settings.
QUICK REFERENCE TYPE OPERATION BUTTON COMMANDS HOLD Basic Operations Power on 1s Power off 1x Volume up/down TAP TAP or 1x TAP Answer a call 1x HOLD End/Reject a call Mobile Phone 2s HOLD Voice dial 3s HOLD Play/Pause music 1s HOLD Music Next/Previous track or 1s HOLD 5s Intercom pairing TAP 1x Intercom Start/End intercom TAP 1x QUICK REFERENCE
