User`s guide

English

SMH5-FM

11.12 Reset to Factory Default Settings

1. To restore the SMH5-FM to factory default settings, press and hold

the Phone Button for 12 seconds until the LED shows solid red

and you hear high tone double beeps. You will also hear a voice

prompt saying “Factory reset”.

2. Within 5 seconds, press the Jog Dial to conrm reset. The headset

will be restored to factory setting and switched off automatically.

You will hear a voice prompt saying “Headset reset, good-bye”.

3. If you don’t press the Jog Dial within 5 seconds, the reset attempt

is canceled and the headset returns to stand-by mode. You will

hear a voice prompt saying, “Canceled”.

11.13 Fault Reset

When the SMH5-FM is not working properly or is in faulty status for

any reason, you may reset by pushing the pin-hole reset button at

the back of the headset main unit. Insert a paper clip into the reset

pin-hole and press the reset button for a second with light pressure.

The SMH5-FM will be switched off after which time, you have to turn

the system back on and try again. However, this will not restore the

headset to factory default settings.