Operation Manual

SMH10
19
OPERATION QUICK REFERENCE
Button Description Duration LED Beep
Phone Button +
Jog Dial
Power-on 1 sec Solid blue Ascending beeps
Power-off Tapping Solid red Descending beeps
Phone Button
Mobile phone pairing 5 sec
Blue & red alternatively
flashing
High-tone multiple beeps
MP3, GPS pairing 5 sec
Blue & red alternatively
flashing
High-tone multiple beeps
Voice activated phone
answering setting
8 sec Red flashing Mid-tone single beep
Phone Button to enable
Jog Dial to disable
Factory reset
12 sec Solid red High-tone double beeps
Jog Dial within 5 sec to confirm reset
Make & answer phone
call
Tapping - -
Jog Dial
Intercom pairing
5 sec Red flashing Double-tone beeps
Jog Dial of any one of the two headsets
Voice activated Inter-
com setting
8 sec Solid red Mid-tone single beep
Jog Dial to enable
Phone Button to disable
Start/end intercom
conversation
Tapping - -
End conference intercom 1 sec Blue flashing
Mid-tone single beep
Reject incoming call Tapping - -
Call transfer Tapping - High-tone short/long beep
Volume adjustment Rotating - -
Track forward/ back
Rotating w/
pressing
- -
Play/pause
Bluetooth music
1 sec -
Mid-tone double beeps
BATTERY INFORMATION
The SMH10 has an internal, non-removable, rechargeable battery. Do not attempt to
remove the battery from the device as you may damage the device. The battery
can be charged and discharged hundreds of times, but it will eventually wear
out. Recharge the battery only with SENA approved chargers designated for this
device. Use of an unapproved charger may present a risk of fire, explosion, leakage,
or other hazard.
Always try to keep the battery between 15 C and 25 C (59 F and 77 F). Extreme
temperatures reduce the capacity and lifetime of the battery. A device with a hot or
cold battery may not work temporarily. Battery performance is particularly limited
in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if
damaged. Never use any charger that is damaged. Operating times are estimates
only and depend on the devices used together, features used, battery age and
condition, temperatures to which battery is exposed, and many other factors.