User Manual

ManualsBrandsSena ManualsMotorcycle IntercomSENA SC2 Motorcycle Intercom

SC2 Manual

SC2

Charging

SC2

Red LED: Charging

Blue LED: Fully charged

Power On/Off

SC2

Press and hold the Multi-function Button for 1 second

SC2 Remote Control

Tap the Center Button

Volume Adjustment

(+) Button - Increase the volume

(-) Button - Decrease the volume

Summary of content (5 pages)

PAGE 1
SC2 Manual SC2 Charging SC2 Red LED: Charging Blue LED: Fully charged Power On/Off SC2 Press and hold the Multi-function Button for 1 second SC2 Remote Control Tap the Center Button Volume Adjustment (+) Button - Increase the volume (-) Button - Decrease the volume
PAGE 2
Battery Check Phone, Music Pairing 1. Press the Center Button for 10 seconds. 2. Press the (+) Button to enter into Phone Pairing 3. Search for Bluetooth devices on your mobile phone. Select the SC2 in the list of the devices detected on the mobile phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. Music Operation Play or pause music: Press the Center Button for 1 second. Track back: Press the (-) Button for 1 second. Track forward: Press the (+) Button for 1 second.
PAGE 3
Intercom Intercom Pairing 1. Press and hold the Center Button of two headsets for 5 seconds until red LEDs of both units start to flash rapidly. 2. The SC2 will automatically pair with a Sena headset Intercom Start/End : Tap the Center Button Mesh Intercom Mesh Intercom On/Off : Tap the Mesh Button Radio On/Off Turn on the FM radio: Press the (-) Button for 1 second. Turn off the FM radio: Press the (-) Button for 1 second. Radio Scan Up FM Band Start scanning: Press (+) Button for 1 second.
PAGE 4
If you want to restore the SC2 to factory default settings, press and hold the Multi-function Button for 12 seconds. The SC2 automatically restores the default settings and turns off. Certification and Safety Approvals FCC Compliance Statement This device complies with part 15 of the FCC rules.
PAGE 5
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. IC RF Exposure Statement Cet équipement est conforme aux limites d'exposition aux radiations de la FCC définies pour un environnement non contrôlé. Les utilisateurs finaux doivent suivre les instructions d'utilisation spécifiques pour satisfaire à la conformité d'exposition RF.