Quick start manual

STER PMU Quick Start Manual Getting started
20
Figure 3.18: Accessing the SETUP menu
There are 3 setup menu items in the SETUP menu:
 MEASUREMENT SETUP: used for configuring voltage and current measurement ratios,
 COMMUNICATION SETUP: used for configuring the modem,
 SYSTEM SETUP: advanced system settings.
To configure the modem:
 Press the Down key ( ) to select the COMMUNICATION SETUP menu item,
 Then press Enter ( ) to enter this screen.
3.3.3 COMMUNICATION SETUP MENU
Figure 3.19: COMMUNICATION SETUP screen
To connect to the Wamster server using the SENA Serial-to-ethernet converter, make sure that the settings are
configured as specified:
 Source: ETHERNET
 Baud rate: 115200
 PDC: www.ster.hr
 PDC port: 5000
Use Up, Down, Left, Right keys to modify settings. When finished, press the button to start connection
initialization.
To stop the connection, press the button again. When finished, press twice to return to the main screen.
3.3.4 MANAGING THE DEVICE USING THE WAMSTER WEB INTERFACE
After the device has been connected, it can be managed through the Wamster web interface. To access the web
interface, please visit www.wamster.net/users and log in using provided credentials.
Web interface for device management can also be accessed by entering the Advanced menu from the
www.wamster.net home page.
After logging in, web interface should display statuses and management options for devices registered under your
username. If some of the devices are not being shown, please contact the distributor to associate these devices
with your account.