Bluetooth USB Adapter Parani-UD100 User Guide Version 3.0.
Parani-UD100 User Guide Document Version 3.0.0 Firmware version 3.0.X Printed in Korea Copyright Copyright 2011~2013, Sena Technologies, Inc. All rights reserved. Sena Technologies reserves the right to make changes and improvements to its product without providing notice. Trademark Parani™ is a trademark of Sena Technologies, Inc. Windows® is a registered trademark of Microsoft Corporation. Ethernet® is a registered trademark of XEROX Corporation.
Contents 1. Introduction 4 1.1. Overview .......................................................................................................................................... 4 1.2. Package Check List......................................................................................................................... 4 1.3. Product Specification ....................................................................................................................... 5 2.
1. Introduction 1.1. Overview Thank you for purchasing Parani-UD100. Parani-UD100 is a Bluetooth-USB adapter with replaceable external antenna. Parani-UD100 supports Bluetooth 4.0 class 1 with working distance up to 300 meters. In addition, working distance can be further extended using optional dipole or patch antennas. Parani-UD100 supports USB 2.0 for the computer interface and can be used with Windows using Bluetooth stack driver included in the CD or MAC OS X using MAC OS X Bluetooth stack driver. 1.
1.3. Product Specification Standards Max Transfer Rate Frequency Range Transmit Output Power Receive Sensitivity Antenna Connector Antenna Gain Working Distance (In Open Field) Bluetooth Stack Software Bluetooth Profiles Computer OS Support Size Operating Temperature Storage Temperature Humidity Regulatory Approvals Warranty Bluetooth 4.0 Class 1 USB 2.0 3 Mbps (EDR) 2.402 ~ 2.480GHz +19dBm (+6dBm EDR) E.I.R.
2. Installing the Bluetooth Software This chapter describes how to install and set up the Bluetooth software on your computer. Before connecting the Parani-UD100, you must install the Bluetooth software. You should also uninstall any kind of Bluetooth driver or utility already installed on your computer such as Widcomm BTW or Toshiba, if any. a. Insert the installation software CD. b. Click on “Install Bluetooth Utility / Driver” c. The Choose Setup Language dialog box appears.
e. Read the License and click the “I accept the terms in the license agreement” radio button. Then click the Next button. (Figure 2.3) f. Click the Next button. If you want to change the destination folder, click Browse and select the destination folder of your choice. (Figure 2.4) Figure 2.3: License Agreement Figure 2.
g. Click the Install button to begin the installation. (Figure 2.5) h. Installation is completed. Click the Finish button. (Figure 2.6) Figure 2.5: Ready to install Figure 2.
i. Click the Yes button to restart your PC. Figure 2.7: restart your PC * Note : Latest BlueSoleil Device Driver http://www.bluesoleil.com/products/S0001201008080001.
3. Using the Bluetooth Adapter This chapter describes how you can use Parani-UD100 to make use of SPP, DUN, stereo headset and other Bluetooth services. 3.1. Starting Bluetooth Adapter a. Plug in the Parani-UD100 to USB port. b. Right-click on the Bluetooth icon on the tray, and then click on “Turn on Bluetooth” (Figure 3.1). Figure 3.
3.2. Searching for Bluetooth Devices To establish a Bluetooth connection, you need to find the Bluetooth devices first. a. Make the remote device discoverable. b. Double-click on the Bluetooth icon on the tray, then BlueSoleil window pops up. (Figure 3.2). c. Double-click on the My Device icon, namely, the orange ball in the center of the window. d. Bluetooth devices will appear in the window after a while. (Figure 3.3) Figure 3.3: Search Devices Figure 3.
3.3. Using Bluetooth Serial Port This section describes how to use the Bluetooth serial port. The Bluetooth Serial Port (SPP) provides a virtual serial port via Bluetooth. Any program that uses a standard serial port can use the Bluetooth serial port. A Bluetooth passkey (PIN code) is required for to connect to. Please confirm your Bluetooth PIN code. a. To search for your device, double-click on the My Device icon, namely, the orange ball in the center of the window. (Figure 3.4) b.
c. Right-click on your device icon, and then click on “Connect Bluetooth Serial Port” (Figure 3.6) d. The connection is established successfully. You can use Bluetooth Serial Port. (Figure 3.7) Figure 3.6: Connect Bluetooth Serial Port Figure 3.
e. To disconnect the connection, right-click on your device icon. And then click “Disconnect Bluetooth Serial Port” (Figure 3.8) Figure 3.
3.4. Using Dial-up Network (DUN) This section describes how to connect to the Internet using a mobile telephone. You need to have already signed up with a provider and obtained a connection ID and password. Please ensure you have confirmed the ID, password and telephone number of your provider's access point before you begin the set-up process. A Bluetooth passkey (PIN code) is required for to connect to. Please make a note of your Bluetooth passkey. a.
c. Right-click on your device icon, and then click on “Connect Bluetooth Dial-Up Networking” (Figure 3.11) d. Type the Bluetooth Passkey (PIN Code). And then click the “OK” button (Figure 3.12) Figure 3.11: Connect Dial-Up Networking Figure 3.
e. Click the Dial-up Connection icon on your taskbar then pop up the window. (Figure 3.13) f. Type your ID and password according to the arrangement with your provider. And then click the “Dial” button. (Figure 3.14) Figure 3.13: Dial-Up Connection icon Figure 3.
g. The connection is established successfully. You can use Bluetooth Dial-Up network. (Figure 3.15) h. To disconnect the connection, right-click on your device icon. And then click “Disconnect Bluetooth Dial-Up Networking”.(Figure 3.16) Figure 3.16: Disconnect Dial-Up Connection Figure 3.
3.5. Using Bluetooth Stereo Headset This section describes how to use the Bluetooth stereo headset to listen to your stereo music. A Bluetooth passkey (PIN code) is required for to connect to. Please confirm your headset PIN code. a. To search for your device, double-click on the My Device icon, namely, the orange ball in the center of the window. (Figure 3.17) b. Turn your headset on and activate "Discoverable" mode. c. Click and right-click on your device, and then click on “Search Services” (Figure 3.
d. Right-click on your device icon, and then click on “Connect Bluetooth Advanced Audio” (Figure 3.19) e. If you are connecting to the stereo headset for the first time, type the Bluetooth Passkey (PIN Code). And then click the “OK” button (Figure 3.20) Figure 3.20: Type the Passkey Figure 3.
f. The connection is established successfully. You can listen to your stereo music. (Figure 3.21) g. To disconnect the connection, right-click on your device icon. And then click “Disconnect Bluetooth Advanced Audio”.(Figure 3.22) Figure 3.21: Bluetooth Stereo Headset Connection Figure 3.
3.6. Using Other Bluetooth Services For more information on other Bluetooth services, please refer to the online Help provided by the Bluetooth Manager software. To open the Bluetooth Manager Help, Double click "Bluetooth Places" icon on the desktop, and then click the Show Menu button-> Help -> BlueSoleil Online Help (Figure 3.23). Figure 3.
Appendix A.
Appendix B. Warranty B.1. GENERAL WARRANTY POLICY Sena Technologies, Inc. (hereinafter referred to as SENA) warrants that the Product shall conform to and perform in accordance with published technical specifications and the accompanying written materials, and shall be free of defects in materials and workmanship, for the period of time herein indicated, such warranty period commencing upon receipt of the Product.
- Power fluctuations, high voltage discharges, - Improper grounding, incorrect cabling, - Misuse, negligence by the customer or any other third party, - Failure to install or operate the product (s) in accordance to their SENA User Manual, - Failure caused by improper or inadequate maintenance by the customer or any other third party, - Floods, lightning, earthquakes, - Water spills, - Replacement of parts due to normal wear and tear, - Hardware has been altered in any way, - Product that has been exposed t
Appendix C. Contact Information If you have any questions regarding the product, please contact your local dealer/distributor or contact us directly as contact information below: Contact Technical Support Web Email Phone http://www.sena.com/support/contact_support/ support@sena.com Toll Free (US/Canada): 1-8668-US-SENA (1-866-887-7362) Outside from US/Canada: +1 (408) 448-1997 Contact Sales Web Email Phone http://www.sena.com/where_to_buy/contact_sales/ sales@sena.
