User guide

Latitude SX Smart Snow Helmet | 12
3. Pairing the Bluetooth SyStem
with other Bluetooth DeviceS
Before using the Bluetooth system with other Bluetooth devices for the
first time, they’ll need to be “paired”. This enables them to recognize
and communicate with one another whenever they’re within range.
The Bluetooth system can pair with multiple Bluetooth devices such as
mobile phone, MP3 player. The pairing operation is required only once
for each Bluetooth device.
3.1 Phone Pairing
There are two ways to pair the phone.
3.1.1 Pairing When the Latitude SX is Turned Off
1. Press and hold the (+) Button and (-) Button for 5 seconds when the
Latitude SX is turned off.
=
5s
HOLD
2. With your mobile phone in Bluetooth-pairing mode, select Latitude
SX in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
3.1.2 Pairing When the Latitude SX is Turned On
1. Press and hold the Sena Button for 10 seconds when the Latitude
SX is turned on.
=
10s
HOLD
2. With your mobile phone in Bluetooth-pairing mode, select Latitude
SX in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
CHAPTER