SENA Latitude SX Smart SNOW Helmet USER’S GUIDE Version 1.1.
TABLE OF CONTENTS 1. ABOUT THE Latitude SX Smart SNOW Helmet 4 1.1 General Information 4 1.2 Product Details 5 1.3 Package Contents 5 1.4 Wearing the Helmet 6 1.4.1 1.4.2 2. How To Fit the Helmet Helmet Fitment Check GETTING STARTED: BLUETOOTH SYSTEM 2.1 Downloadable Sena Software 2.1.1 2.1.2 Sena Outdoor App Sena Device Manager 6 8 9 9 9 9 2.2 Button Function 10 2.3 Powering On and Off 10 2.4 Charging 10 2.5 Checking the Battery Level 11 2.6 Volume Adjustment 11 3.
TABLE OF CONTENTS CONTINUED 6. BLUETOOTH INTERCOM 15 6.1 Intercom Pairing 15 6.2 Two-Way Intercom 16 6.2.1 HD Intercom 6.3 Multi-Way Intercom 6.3.1 6.3.2 6.3.3 Starting a Three-Way Intercom Conference Starting a Four-Way Intercom Conference Ending Multi-Way Intercom 16 16 17 17 17 6.4 Group Intercom 18 7. 19 USING THE FM RADIO 7.1 FM Radio On/Off 19 7.2 Navigating Preset Stations 19 7.3 Seek and Save Radio Stations 19 8. FUNCTION PRIORITY AND FIRMWARE UPGRADES 20 8.
1. ABOUT THE Latitude SX Smart SNOW Helmet 1.1 General Information This product is a snow helmet. Do not use it for any other purpose than snow sports. If you use the helmet for anything else, it may not provide sufficient protection in an accident. Sena recommends that you choose a helmet which provides the most coverage, as a helmet that covers more of your head may provide additional protection. Make sure the helmet fits comfortably and is tightly fastened at all times.
1 ABOUT THE Latitude SX Smart SNOW Helmet 1.2 Product Details Ventilation (-) Button Microphone Status LED Speaker (+) Button SENA Button Ventilation DC Power Charging & Firmware Upgrade Port Speaker 1.
1 ABOUT THE Latitude SX Smart SNOW Helmet 1.4 Wearing the Helmet 1.4.1 How To Fit the Helmet For proper use, the helmet must sit level on the head and low on the forehead. The helmet uses a simple, quick-release buckle system that, once adjusted, can be buckled and unbuckled without changing the adjustment. For proper use, the straps must be tight and evenly tensioned. To properly wear your helmet: 1. Position the helmet on your head with the front covering your forehead.
1 ABOUT THE Latitude SX Smart SNOW Helmet Strap Adjuster Buckle Chinstrap Chinstrap Pad O-ring 5. After removing the “Chinstrap Pad”, secure the excess strap with “O-Ring” and then attach the “Chinstrap Pad” again. 6. Always wear the helmet with the chinstrap buckle fastened and the chinstrap pulled tight and positioned back against the throat. With the strap buckled and the helmet positioned, you should feel the chinstrap pull firmly against your chin as you open your mouth.
1 ABOUT THE Latitude SX Smart SNOW Helmet 1.4.2 Helmet Fitment Check With the retention system knob turned clockwise until comfortably tight and the chinstrap buckled under the chin and back against the throat, grab the helmet with both hands and try to remove it by rolling the helmet forward and backward as far as you can. This is an important test to ensure that the helmet fits correctly.
2. GETTING STARTED: BLUETOOTH SYSTEM 2.1 Downloadable Sena Software 2.1.1 Sena Outdoor App By simply pairing your phone with your Bluetooth system, you can use the Sena Outdoor App for quicker and easier set up and management. • App Features: Intercom, Music, FM Radio, Device settings, Quick Start Guide, and User’s Guide. • Download - Android: Google Play Store > ‘Sena Outdoor’ - iOS: App Store > ‘Sena Outdoor’ 2.1.
2 GETTING STARTED: BLUETOOTH SYSTEM 2.2 Button Function Bluetooth System’s Buttons (-) Button SENA Button Status LED (+) Button 2.3 Powering On and Off Powering On = Powering Off HOLD 1s = TAP 1x 2.4 Charging Charging the Bluetooth System Depending upon the charging method, the Bluetooth system will be fully charged in about 3 hours. Note: • Please make sure to take off your helmet while charging. The Bluetooth system automatically turns off during charging.
2 GETTING STARTED: BLUETOOTH SYSTEM 2.5 Checking the Battery Level Visual Method is for when powering the Bluetooth system on. Audible Method Visual Method HOLD = 1s HOLD = 3s “Battery level high/medium/low” = high = MEDium = LOW Note: • The battery performance may be reduced over time with usage. • Battery life may vary depending on conditions, environmental factors, functions of the product in use, and devices used with it. 2.
3. Pairing the Bluetooth System with other Bluetooth Devices Before using the Bluetooth system with other Bluetooth devices for the first time, they’ll need to be “paired”. This enables them to recognize and communicate with one another whenever they’re within range. The Bluetooth system can pair with multiple Bluetooth devices such as mobile phone, MP3 player. The pairing operation is required only once for each Bluetooth device. 3.1 Phone Pairing There are two ways to pair the phone. 3.1.
4. MOBILE PHONE USAGE 4.
5. STEREO MUSIC 5.
6. BLUETOOTH INTERCOM 6.1 Intercom Pairing Up to three other people can be paired with the helmet for Bluetooth intercom conversations. 1. Press and hold the Sena Button of two Bluetooth systems for 5 seconds until flashes red. 2. Tap the Sena Button on either Bluetooth system and wait until the LEDs of both turn blue. Pairing with Intercom B & = On Either One of the Devices HOLD or 5s = TAP 1x 3. Repeat steps 1 and 2 to pair with Intercom Friends C & D.
6 BLUETOOTH INTERCOM 6.2 Two-Way Intercom You can start or end an intercom conversation with an Intercom Friend by tapping the Sena Button. Start/End Two-Way Intercom with Intercom Friend 1,2,3 TAP = 1x = TAP 2x = TAP Intercom Friend 1 Intercom Friend 2 3x Intercom Friend 3 6.2.1 HD Intercom HD Intercom enhances the two-way intercom audio from normal quality to HD quality. when you enter into a multi-way intercom, HD Intercom will be automatically disabled.
6 BLUETOOTH INTERCOM 6.3.1 Starting a Three-Way Intercom Conference You (A) can have a Three-Way intercom Conference with two other Intercom Friends (B & C) by establishing two intercom connections simultaneously. 1. You (A) need to be paired with two other Intercom Friends (B & C) for three way conference intercom. 2. Start an intercom conversation with one of the two friends in your intercom group. 3.
6 BLUETOOTH INTERCOM 6.4 Group Intercom Group Intercom allows you to instantly create a Multi-Way Conference Intercom with three of the most recently paired headsets. Go through intercom pairing with up to three people you want in the Group Intercom.
7. USING THE FM RADIO 7.1 FM Radio On/Off FM Radio On FM Radio Off HOLD = = 1s HOLD 1s 7.2 Navigating Preset Stations Navigate through Preset Stations HOLD = 1s 7.3 Seek and Save Radio Stations Seek Stations Forward HOLD = 1s Save Stations 1. Enter preset selection mode. = HOLD 3s 2. Navigate forward or backward through preset stations that you want to store. = TAP 1x = TAP 1x 3. Save station to the preset number or delete station from memory.
8. FUNCTION PRIORITY AND FIRMWARE UPGRADES 8.1 Function Priority The Bluetooth system operates in the following order of priority: (highest) Mobile phone Intercom Bluetooth stereo music (lowest) FM radio A lower priority function is always interrupted by a higher priority function. 8.2 Firmware Upgrades The Bluetooth system supports firmware upgrades. You can upgrade the firmware using the Sena Device Manager. Please visit sena.com to check for the latest software downloads. Click Here to Visit sena.
9. CONFIGURATION SETTING 9.1 Configuration Setting You can change the settings of the Bluetooth system through the Sena Device Manager or the Sena Outdoor App. 9.1.1 RDS AF Setting (Default: Disable) Radio Data System (RDS) Alternative Frequency (AF) Setting allows a receiver to re-tune to the second frequency location when the first signal becomes too weak. With RDS AF enabled on the receiver, a radio station with more than one frequency can be used. 9.1.
10. TROUBLESHOOTING 10.1 Fault Reset When the USB charging & data cable connects a power supply to the Bluetooth system, the Bluetooth system will automatically be turned off and a fault reset will occur. = Note: Fault Reset will not restore the Bluetooth system to factory default settings. 10.2 Factory Reset To erase all of your settings and start fresh, the Bluetooth system can be restored to factory default settings using the factory reset.
11. MAINTENANCE AND CARE The inner lining of the helmet is completely removable. Its headliner can be washed by hand using only water, mild soap, at a maximum temperature of 30ºC (86ºF), and non-abrasive cloths to clean the helmet’s shell, pads and retention system. Allow the padding to dry at room temperature. Store the helmet in a dry, dark, well-ventilated location, out of the reach of children and animals. High temperatures (above 110ºF, 43ºC) may melt the helmet’s shell.
Copyright © 2020 Sena Technologies, Inc. All rights reserved. © 1998–2020 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries.
