Version 1.0.
For more information and Technical Support, please contact: Sena Technologies, Inc. 210 Yangjae-dong, Seocho-gu Seoul 137-130, Korea Tel : (+82-2)-573-5422 Fax : (+82 -2) 573-7710 E -Mail : support@sena.com Website : http://www.sena.com H TU UTH TU H UT H H Worldwide Sales: AVE Added Value Electronics BV Vissersdijk Beneden 17 3319 GW Dordrecht The Netherlands M r. Johan B. Bickel Sales Manager Tel. +31 (0)78 – 6215900 Fax +31 (0)78 -6215815 johan@ave-nl.com http://www.ave-nl.
Promi-SD 205-OA User Manual – Table of Contents 1 Table of Contents Before Using the Product ...................................................................... 3 Welcome........................................................................................................3 Copyrights/Certification/Limited Liability .................................................. 3 Precautions and Safety................................................................................
Promi-SD 205-OA User Manual – Table of Contents 2 Appendix A. AT Commands ................................................................ 1 Terminology.................................................................................................... 1 Command Category ................................................................................... 1 Command Description................................................................................. 1 Command Validity ................................
Promi-SD 205-OA User Manual – Before Using the Product 3 Before Using the Product Welcome Copyrights/Certification/Limited Liability Precautions and Safety General Terms and Conditions of Sale get UNWIRED, it’s easy! Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD 205-OA User Manual – Before Using the Product 4 Welcome Thank you for purchasing Promi-SD products. Promi -SD is a terminal device for wireless serial communication using Bluetooth technology, the international standard for short range wireless communications. Its interoperability and credibility delivers the maximum benefits of wireless communication. This user manual is designed to help you use the Promi-SD series properly.
Promi-SD 205-OA User Manual – Before Using the Product 5 Keep away from harsh environments including humid, dusty, and smoky areas. Damage to your products may result from improper use. Do not use excessive force on the buttons or attempt to disassemble the device. Damage to your products may result from improper use. Do not place heavy objects on the product. Damage to your products may result from improper use. General Terms and Conditions of Sale 1. GENERAL.
Promi-SD 205-OA User Manual – Before Using the Product 6 5. RESALE OF THIRD-PARTY BRANDED PRODUCTS AND SERVICES. NOTWITHSTANDING ANY OTHER PROVISION HEREIN, SELLER MAKES NO REPRESENTATIONS, PROVIDES NO INDEMNITIES (INTELLECTUAL PROPERTY OR OTHERWISE), AND DISCLAIMS ALL WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED RELATIVE TO ANY THIRD-PARTY BRANDED PRODUCT OR SERVICE (INCLUDING TRAINING) WHICH MAY BE RESOLD OR SUBLICENSED BY SELLER AS A DISCRETE ITEM HEREUNDER. 6. LICENSED SOFTWARE AND FIRMWARE.
Promi-SD 205-OA User Manual – 1. Getting Started 7 1. Getting Started Features of Promi-SD Components Assembly Locating the Controls get UNWIRED, it’s easy! Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD 205-OA User Manual – 1. Getting Started 8 Features of Promi–SD Reliability and Interoperability Promi -SD is a terminal device for wireless serial communication using the Bluetooth technology that is international standard of short range wireless communications. Promi-SD accomplishes more reliable wireless communication. As Promi -SD can communicate with other Bluetooth devices, user may construct various communications with it.
Promi-SD 205-OA User Manual – 1. Getting Started 9 Components Stub Antenna Promi-SD205 DC 5V Power Cable Special RS232 Cable (Female-Female) ONLY for PC to PROMI-SD202/205-OA connection Part no. PSD00-00070 Fig.1-1 Components of Promi-SD Please check the components of Promi-SD in Fig. 1-1 when purchasing. The picture of product may differ by models. The components of the package may change for improving product capacity or quality without notice. Assembly ※ Antenna is left-hand threaded.
Promi-SD 205-OA User Manual – 1. Getting Started 10 Locating the Controls Front Panel † Power Jack Back Label ‡ Power Switch Reset Button Fig.1-3 Locating the Controls Front Panel † Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD 205-OA User Manual – 2. Configurations Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD 205-OA User Manual – 2. Configurations 12 2. Configurations Operation Modes LED Indicators Serial Ports Reset to Factory Defaults PromiWizard ™ P P PromiWIN™ P P Terminal Program Dip Switch Pairing Button get UNWIRED, it’s easy! Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD 205-OA User Manual – 2. Configurations 13 Operation Modes In addition to the serial port configurations such as bit/second, data bit, parity, stop bit, flow control, Promi-SD has some configurations for Bluetooth. For getting the most out of Promi-SD, user should understand the following Bluetooth connection schemes. A Bluetooth device can play a role as a master or slave. Master tries to connect itself to other Bluetooth device, and slave is waiting to be connected from other Bluetooth devices.
Promi-SD 205-OA User Manual – 2. Configurations 14 LED Indicators Indicator Power LED Standby LED Connect LED Mode0 Green ┏━━━━━━━ Red Mode1 Green ┏━━━━━━━ Green (every 1 sec) ┏┓ Mode2 Green ┏━━━━━━━ Green (every 3 sec) ┏┰┓ Mode3 Green ┏━━━━━━━ Green (every 3 sec) ┏┰┓ Connected Green ┏━━━━━━━ Green ┏━━━━━━━ ┏━━━━━━━ RS232-Tx and RS232-Rx LED are blinking accordingly when data is transmitted. For small data transmission, it may be hard to recognize the quick blinking.
Promi-SD 205-OA User Manual – 2. Configurations 15 Upper 3 dip switches are used for setting baud rate. If the baud rate needs to be set out of the range given below, Promi WIN or terminal program should be used for extended AT commands. At this time combination of dip switches must be complied with AT cmd. Then baud rate will go back to 9600 as default. Baud Rate 2400 Hardware Flow Control 4800 9600 No use 19.2K 38.4K 57.6K 115.
Promi-SD 205-OA User Manual – 2. Configurations 16 Promi WIN is a program running on Microsoft Windows for the configuration of Promi-SD. Install PromiWIN on your computer. Plug a Promi-SD into the serial port of the computer and turn on the power. Run PromiWIN. Set each option properly and click [Confirm]. If the settings are different from the host computer, error message will pop up. If the Promi-SD is in the status of connection, warning message will pop up.
Promi-SD 205-OA User Manual – 2. Configurations 17 Serial port settings can be changed by and of PromiWIN in the menu bar at upper left corner of the window without re-running the PromiWIN program. The icons in the left side window come to the corresponding windows. In device configura tion window, hardware reset can be executed or operation mode and RS232 can be configured as well. Security option also can be configured in this window.
Promi-SD 205-OA User Manual – 2. Configurations 18 For Promi-SD205 OA pin 4 and pin 5 are connected in the hardware to disable hardware flowcontrol. Thus H/W Flow Control option will not work in this case. When the dip switch value isn’t ATcommand mode, the RS-232 menu is disabled. Click [Apply] button to reflect the given options to Promi -SD actually. Connect(out) icon will show the following window to search and connect other Bluetooth devices. Click [Search] button to search nearby Bluetooth devices.
Promi-SD 205-OA User Manual – 2. Configurations 19 If the Connection Wizard icon is clicked, an easy pairing menu to use appears as follows: This menu help pairing configuration of Promi-ESD that hasn’t pairing button. Although this menu can be used to pairing configuration of Promi-SD that has pair ing button, pairing configuration through pairing button is recommended. To use this menu, follow next steps. 1. Connect the first SD and then push the START button. 2.
Promi-SD 205-OA User Manual – 2. Configurations 20 * Note: DO NOT power off Promi-SD while the firmware update is progressing, this may damage the Promi-SD. Terminal Program A terminal program is an application that will enable a PC to communicate directly with a modem. If you are using Windows 98SE or higher version of Windows, HyperTerminal program as it is included as part of the operating system. Promi -SD provides some extended AT commands for its configurations on terminal program.
Promi-SD 205-OA User Manual – 2. Configurations 21 Choose the settings in File ->Properties->Settings->ASCII setup that let you turn echo on in HyperTerminal; this will show the response Promi-SD sends on the screen. You now get the HyperTerminal window where you are able to control Promi-SD with AT commands. For expanded AT commands that Promi-SD provides, please refer to Appendix A. AT commands.
Promi-SD 205-OA User Manual – 3. Connections 22 3. Connections RS232 Interface Pin Assignment Power Supply get UNWIRED, it’s easy! Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD 205-OA User Manual – 3. Connections 23 RS232C Interface RS232C In the early 1960s, a standards committee, today known as the Electronic Industries Association, developed a common interface standard for data communications equipment. At that time, data communications was thought to mean digital data exchange between a centrally located mainframe computer and a remote computer terminal, or possibly between two terminals without a computer involved.
Promi-SD 205-OA User Manual – 3. Connections 24 Power Supply Promi -SD can be supplied power through the power jack and through pin 6 of DB9 connector. Through Power Jack DC 5 ~ 12V, Min. 150mA power should be supplied through DC power cable. Red cable is positive and black one is negative. Electrical Polarity DC Power Cable Red + Black - AC/DC power adaptor and USB power cable are also available to supply power.
Promi-SD 205-OA User Manual – 4. Trouble Shooting 25 4. Trouble Shooting No Data Transmission Data Loss or Malfunctioning Transmission Delay get UNWIRED, it’s easy! Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD 205-OA User Manual – 4. Trouble Shooting 26 No Data Transmission COM Port Settings Check whether the Baud rate of Promi-SD is same as that of its host equipment. If you do not know the current Baud rate of Promi-SD, initialize it to 9600 by pressing Reset Button. Note that in case of SD the baudrate setting does not change after reset. Check whether the Data bit is set to 8. Promi -SD supports only 8 Data bit.
Promi-SD 205-OA User Manual – 5. Specifications 27 5. Specifications Bluetooth Interface Serial Interface Power Mechanical Dimensions Environmental Default Antenna Power Consumption Wireless Coverage get UNWIRED, it’s easy! Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD 205-OA User Manual – 5. Specifications 28 Bluetooth Interface Bluetooth 1.2 specification compatible and qualified Protocol: RFCOMM, L2CAP, SDP Profiles: Serial Port Profile, Generic Access Profile, Service Discovery Profile Radio Frequency: 2.4 ~ 2.4738GHz Number of Channels: 79 Transmission Power Class 2 (Promi-SD200) Data Transmission Rate: 380Kbps Max.
Promi-SD 205-OA User Manual – 5. Specifications 29 Default Antenna Type: Helical Frequency: 2,400 ~ 2,485GHz Gain: Max. 1dBi ±1 Impedance: 50Ω size: 30mm9mm (W D) weight: 3.5g Power Consumption The power consumption varies according to the operation status of Promi-SD. The table below shows the average measuring results in different operation modes with 1m communication distance.
Promi-SD User Manual – Appendix A. AT Commands A-1 Appendix A. AT Commands Terminology Command Category Command Description Command Validity get UNWIRED, it’s easy! Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD User Manual – Appendix A. AT Commands A-2 Terminology AT Command AT command set is the de facto standard language for controlling modems . The AT command set was developed by Hayes and is recognized by virtually all personal computer modems. Promi-SD provides the extended AT command set to control and configure the serial parameters and Bluetooth connection.
Promi-SD User Manual – Appendix A.
Promi-SD User Manual – Appendix A. AT Commands Command Description 1 ATZ SD Response OK Purpose Software Reset Description This is the same effect as power off and on. This command disconnects Bluetooth device, and stops ongoing task. After rebooting, the status is decided by the preset operation mode. Some AT commands need ATZ to take effect.
Promi-SD User Manual – Appendix A.
Promi-SD User Manual – Appendix A. AT Commands OK Purpose Display device firmware version Description Display device firmware version Reference AT+BTINFO? 10 AT+BTRSSI,n SD Response OK 0,255,0,0 (repeat) Purpose Set operation mode Parameters n=0: Start sensitivity test n=1: Stop sensitivity test Description When Bluetooth connection is established, you can use this command in Stanby status. The sensitivity will be displayed repeatedly in order of Status, LinkQuality, Status, RSSI.
Promi-SD User Manual – Appendix A. AT Commands ‘+’ is an escape sequence character by default, which is changeable by AT+SETESC. Reference AT+SETESC, ATO, AT+BTCANCEL 13 AT+SETESC,nn SD Response OK Purpose Change the escape sequence character Parameters nn=Decimal number of ASCII code (Default=43) Description Escape sequence character set to ‘+’ by default is changeable. The parameter nn must be a printable character.
Promi-SD User Manual – Appendix A. AT Commands or OK ERROR Purpose Wait for inquiry and connection from other Bluetooth devices for a given duration Parameters n=1: Allows Inquiry scan n=2: Allows Page scan n=3: Allows both of Inquiry scan and Page scan to= Time duration in seconds Description For the given to, Promi-SD is waiting for the inquiry and connection from other Bluetooth devices. If the parameter of to is 0, it will wait forever.
Promi-SD User Manual – Appendix A. AT Commands SD Response OK CONNECT 112233445566 or OK ERROR Purpose Connect to the Bluetooth device with given BD address Parameters 112233445566=BD address Description Promi-SD attempts to connect to the Bluetooth device with the given BD address. To make successful connection, the Bluetooth device must be in Page scan. This attempt continues for 5 minutes. If it fails to make connection, SD response is ‘ERROR’.
Promi-SD User Manual – Appendix A. AT Commands A-10 Purpose Clear the list of Bluetooth devices sharing the pin code Description This clears the list of Bluetooth devices with link key in flash memory. To take effect of this command, ATZ or power off and on because the main memory still has the list.
Promi-SD User Manual – Appendix A. AT Commands 29 AT+DFU SD Response (Display garbage messages repeatedly) Purpose Device firmware update Description DO NOT use this command in console. Because the SD enter into firmware up date mode, garbage messages will appear. This command is used by PromiWin’s firmware update menu. 30 AT&V SD Response S0:m0;S1:m1; …Sn:mn OK Purpose Display all the S-register Description All parameters are stored at S-register in flash memory.
Promi-SD User Manual – Appendix A.
Promi-SD User Manual – Appendix B. S-Register B-1 Appendix B. S-Register get UNWIRED, it’s easy! Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD User Manual – Appendix. B S-Register B-2 S-Register S-registers contain 46 parameters of Promi-SD. These are stored in flash memory and sustained the values unless hardware reset is executed. The value of S-register can be accessed and changed with ATS command by user. Some S-registers not shown below are set to maximize the performance of Promi-SD. Thus it is not recommended to change these S-registers. Change the value of S-register only in Standby status.
Promi-SD User Manual – Appendix. B S-Register B-3 S11=0, Promi-SD does not allow escape sequence character. The operation status of Connect cannot be changed to Standby. As Promi-SD skips the process detecting escape sequence character, the more efficient data transmission is expected. S11=1, Promi-SD allow escape sequence character. Whenever it is needed, the Connect status can be changed to Standby.
Promi-SD User Manual – Appendix. B S-Register This saves the BD address of the Bluetooth device connected most recently. Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD User Manual – Appendix C. Technical Support C-1 Appendix C. Technical Support get UNWIRED, it’s easy! Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD User Manual – Appendix C. Technical Support C-2 Use this form to request technical support for Promi -SD. Individual form should be filled out for each Promi-SD in question. Referring to the example on separate sheet, please provide as much information as possible so we may resolve and respond to your inquiry promptly. When you have finished, sub mit this form by e-mail to support@sena.com or by fax to +82 2 573 7710.
Promi-SD User Manual – Appendix C.
Promi-SD User Manual – Appendix D. Connection to Omron PLC D-1 Appendix D. Connection to Omron PLC get UNWIRED, it’s easy! Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD User Manual – Appendix D.
Promi-SD User Manual – Appendix D.
Promi-SD User Manual – Appendix D. Connection to Omron PLC Double click on the Find Bluetooth Devices icon Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD User Manual – Appendix D. Connection to Omron PLC Double click on the device you want to connect to Double click on the General Serial on … … . icon Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD User Manual – Appendix D. Connection to Omron PLC D-6 Select the call out box that appears Enter the Password (caption sensible) Connection is established A message is shown what virtual COM port is used for the Bluetooth connection or double click on the generic serial icon and select the properties tab. Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD User Manual – Appendix D. Connection to Omron PLC Configure the PLC for PC to PLC connection by Bluetooth? Start CX-Programmer and set the PLC settings the same as settings of the Promi -SD205-OA via the PLC settings in CX-P. Transfer the settings to the PLC Disconnect from the PLC Change the settings of the PLC to the settings of the Bluetooth device Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-SD User Manual – Appendix D. Connection to Omron PLC Select the virtual com port for Bluetooth and the co rrect data format Go online with the PLC, you succeed in establishing connection to an Omron PLC with Bluetooth!!!! Copyright © 2006 Sena Technologies, Inc. All rights reserved.