User's Manual

- 14 -
Example
AT+GROUPID=ABCD<CR>
OK<CR>
AT+GROUPID?<CR>
ABCD<CR>
OK<CR>
4.4.9. AT+DESTGROUPID
Description
Get/Set the 16-bit destination Group ID for data transmission. (group network)
Example
AT+DESTGROUPID=ABCD<CR>
OK<CR>
AT+DESTGROUPID?<CR>
ABCD<CR>
OK<CR>
4.4.10. AT+INFO
Description
Show the current information of this node.
Response
Information of this node
…
OK<CR>
4.4.11. AT+SCAN
Description
Perform a scanning for joinable network.
Response
List of the joinable networks
…
OK<CR>
4.4.12. AT+ASCAN
Description
Perform a scanning for existing network.
Response
List of the existing networks
…
OK<CR>
4.4.13. AT+ESCAN
Description
Perform a scanning for energy level of each channel.
Response
List of the RSSI for each channel
…
OK<CR>
4.4.14. AT+FORM
Description
Form a network. If there’s no specified channel mask or PAN ID, it does an energy
scan on the indicated channel mask and randomly chooses one from amongst those
with the least average energy. Then picks a short PAN id that does not appear during
an active scan on the chosen channel. At this time extended PAN ID is alternated for