User's Manual

1. INTRODUCTION
Thank you for choosing the Sena FreeWire. The FreeWire is a Bluetooth CB radio and audio adaptor. You can connect
the FreeWire to the motorcycle onboard audio system and make the audio system transfer stereo audio (music, FM radio,
navigation etc.) to a Sena Bluetooth headset.
You can communicate through the built-in CB radio in the onboard audio system using the FreeWire. Also, if you have a
mobile phone connected to the motorcycle onboard audio system by a cable, you can have mobile phone calls using your
headset.
When a rider and a passenger connect the FreeWires to each port and pair a Sena headset to each FreeWire, they can
communicate with each other using the bike’s internal communication network.
Please read this User’s Guide carefully before using the FreeWire. Also refer to www.sena.com for the latest version of
the User’s Guide and additional information related to Sena Blueooth products.
The FreeWire Features:
● Support for onboard built-in CB radio communication
● Wirelessly stream stereo audio to Sena Bluetooth headset
● Support for internal communication between a rider and a passenger each using a FreeWire
● AUX input for GPS, radar detector or laser detector
● Mix the audio sources from the AUX input and the onboard audio system
● 12V bike-powered kit with On/Off controlled by the ignition switch
● Firmware upgradeable
Technical Specifications:
● Bluetooth 4.1
● Advanced Audio Distribution Profile (A2DP)
● Operating time: 7 hours
● Battery charging time: 2.5 hours
● Lithium polymer battery