User's Manual

| 20S

3 INSTALLING THE WRISTBAND REMOTE

1. Use the straps to wear the Wristband Remote on your wrist.

2. After you wear the Wristband Remote, put the strap inside the rubber band.

4 GETTING STARTED

4.1 Charging

You can charge the Wristband 

or USB wall charger. You can use any standard micro-USB cable to charge the Wristband Remote. The LED turns red

while the headset is charging and turns blue when it is fully charged. It takes about 2.5 hours to be fully charged.

4.2 Powering On and Off

Press the Side Button to turn on the Wristband Remote. Press the Side Button and the Joystick simultaneously to turn off

the device.

5 PAIRING WITH YOUR HEADSET

Before using the Wristband Remote with any other Sena headsets for the first time, you will need to pair them together.

The pairing operation is required only once for each Bluetooth device. The device remains paired with the headsets and

automatically reconnects to them when they are within range.

1. Turn on the Wristband Remote and press and hold the Top Button for 5 seconds.

2. Place the headset into Remote Control Pairing mode inside the configuration menu     

manual for details.

3. W

Note:

The Wristband Remote is compliant only with Bluetooth 4.1 Sena Headsets.