User's Manual

11.5 Temporary Preset
With the temporary preset function, you may temporarily preset stations automatically without changing the existing preset
stations. Tap the Rear Button three times to automatically scan for 10 temporary preset stations. The temporary preset
stations will be cleared when the system is powered off.
11.6 Region Selection
You can select the proper FM frequency region from the Sena Device Manager. With the region setting, you may optimize the
seek function to avoid unnecessary frequency ranges (Factory default: worldwide).
Region
Frequency range
Step
Worldwide
76.0 ~ 108.0 MHz
± 100 kHz
Americas
87.5 ~ 107.9 MHz
± 200 kHz
Asia
87.5 ~ 108.0 MHz
± 100 kHz
Australia
87.5 ~ 107.9 MHz
± 200 kHz
Europe
87.5 ~ 108.0 MHz
± 100 kHz
Japan
76.0 ~ 90.0 MHz
± 100 kHz
Function
Handlebar Remote
Headset
FM radio on/off
Press the Rear Button for 1 seconds
Press the (+) Button for 5 seconds
Select preset
Tap the Rear Button
Press the (+) Button for 1 second
Seek stations
Move the Joystick left or right for 1
second
Press the (+) Button or (-) Button
for 3 seconds
Scan up FM
band
Double tap the Rear Button
Press the (-) Button for 5 seconds
Stop scanning
Double tap the Rear Button
Press the (-) Button for 5 seconds
Save preset
while scanning
Tap the Rear Button
Press the (+) Button for 1 second
Temporary
Preset
Triple tap the Rear Button
Press the (-) Button for 2 seconds
Button Operation Table for FM Radio