User's Manual

| 10U
32
13.3 Enabling/Disabling Voice Activated Intercom
Voice Prompt

Factory Default
Disable
Enable
Tap the Front Button
Disable
Press the Joystick for 1
second
If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by voice. When
Hello
conversation by voice, the intercom terminates automatically when you and your intercom friend remain silent for 20
seconds. However, if you manually start an intercom conversation by pressing the Joystick for 1 second, you have to
terminate the intercom conversation manually.
However, if you start intercom by voice and end it manually by pressing the Joystick for 1 second, you will not be able to
start intercom by voice temporarily. In this case, you have to press the Joystick for 1 second to restart the intercom. This
is to prevent repeated unintentional intercom connections by strong wind noise. After rebooting the 10U, you can start
intercom by voice again.
13.4 Enabling/Disabling Voice Prompts
Voice Prompt

Factory Default
Enable
Enable
Tap the Front Button
Disable
Press the Joystick for 1 second
You can disable voice prompts by configuration setting, but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level indicator
- Voice prompts for factory reset
- Voice prompts for speed dial
- Voice prompts for FM radio functions
13.5 Enabling/Disabling RDS AF
Voice Prompt
